How to connect a digital receiver to a TV via HDMI, USB, SCART and RCA

click fraud protection

Operating a satellite dish in your home requires the use of a receiver. What kind of device it is and how to connect the receiver to the TV - you will find a detailed description below. Initially, this device was designed as a multi-channel decoder-amplifier of digital audio and video streams.

Content:

  1. Connecting a satellite receiver to a receiver - general
  2. Features of connecting the receiver - types of connectors
  3. How to connect a Tricolor receiver to two TVs

Connecting a satellite receiver to a receiver - general

With the advent of satellite TV, the receiver became a necessary intermediate link between a satellite dish and a television receiver. This is a kind of switch, multiplexer and decoder in one device, which receives a signal in one format, decodes it in another format and transmits it to the TV via cable. Your television receiver understands this format, and outputs it to the connectors that match your TV.

If you do not know how to connect the receiver to the TV, examine the back panel of the satellite tuner - there you will see which plugs are installed. This can be an av connection, a scart connector, an output for a conventional antenna or an HDMI jack. The question of which cable you will connect your TV receiver to the receiver is not worth it - it all depends on the TV model. From what types of connections are installed in your receiver, you should start when choosing a receiver, and not vice versa. The cost of receivers in the electronics market varies quite a lot - from $ 40 to $ 300.

instagram viewer

How to connect the receiver to the monitor? Your television receiver should have a display, and a connector (and most often several different types) must be installed to connect any auxiliary devices. In our case, this is the receiver. In older TV models, there may not be such plugs. Then there is only a connection to the old television set through the antenna input. In modern TV models, the satellite switch is connected through the following types of connectors:

  1. Hdmi module.
  2. SCART (scart) connector.
  3. Tulips (RCA interface).
  4. Plug for conventional antenna or cable TV signal.

Sometimes you have to use special equipment to adapt the analog and digital signals to receive on the monitor. But adapters from analog to digital stream and vice versa do not exist, so here you will have to use a converter. Consider how to connect a satellite receiver to a TV in all available ways.

Features of connecting the receiver - types of connectors

Hundreds of international electronic companies have spawned the same number of audio and video standards. This diversity has led to device compatibility issues, and therefore a modern digital receiver has so many different input and output jacks. There are 6 types of connectors in total, so you should carefully select the receiver model in order to connect the receiver to the TV through the old type plug.

Receiver

RCA Standard - Tulip Type Connector

Radio Corporation of America has long been the sole developer and supplier of this type. connection, so in all old TVs you’ll see just such a tulip RCA interface. But how to connect a digital monitor through it to the receiver? You need to navigate by the color of the cable.

RCA
  1. Audio connection: right (RIGHT red) and left (LEFT white) channels.
  2. Video connection: yellow connector.

The satellite receiver is connected to the television according to the colors of the cable and connectors: Video IN-Video OUT and Audio IN - Audio OUT (right and left channels, if there is stereo). There is only one drawback of this pioneer - the digital signal is transmitted in relatively low quality, so the RCA interface is suitable for home theater with a big stretch.

S-video connector

S-Video was required to be installed in consoles with computer games and DVD devices, but not every TV could detect such an interface. This standard produces better video quality due to its higher operating frequency, but the audio stream needs to be connected separately via RCA. Therefore, it will be more correct to use other types of connections.

S-video

SCART Connector

The SCART interface, in everyday life a “comb” or “comb”, has advanced, almost universal characteristics. This type of connection of a digital receiver to a TV is available in different versions, so be careful when choosing a cable specifically for your TV model. SCART supports S-video, RGB, stereo. For computer video and high-definition TV, such a plug will not work, as it will not provide the necessary resolution of the digital and analog signal.

Scart

RF connector

Through it, the connection of the satellite receiver to the TV receiver can be made from a conventional and satellite antenna, you can also receive a cable television signal.

  1. Advantage: You can connect two television receivers to one device.
  2. Disadvantage: the quality of streaming is low, so it is recommended to use this connector only for small television receivers.
RF connector

Component connector type YCbCr and YPbPr

This standard uses three cables to transmit high-frequency signals of digital television, so the image quality is very high - you can connect TVs with a resolution of up to 1080p. The YCbCr standard uses digital transmission methods, the YPbPr connector uses analog.

Cables have the following colors: green (for transmitting luminance and clock signals), red (transmits differential signal between brightness and red), and blue (transmits a difference signal between brightness and blue color). The audio stream is connected separately using RCA.

Ycbcr

HDMI standard

The most modern and versatile interface. The receiver with an HDMI cable provides the highest quality audio and video signals in analog and digital format, you can connect TVs with a resolution of 720p / 1080i or 1080p. Used for any TV, with its help you can connect HD equipment.

HDMI

Read also:

  • How to connect a smartphone to a TV via USB, Wi-Fi, HDMI.
  • How to connect speakers to a TV: An overview of the best ways.
  • Connection Instructions TV to Wi-Fi.
  • How to connect a home theater to a TV: https://sovetexpert.ru/soedinit-domashnij-kinoteatr-k-televizoru.html

How to connect a Tricolor receiver to two TVs

Video instruction on the parallel connection of two monitors or digital TVs to the receiver model GS U210, B210, B211. What kind of connectors are used, how to connect them correctly and check the quality of video and audio signals. Using the adapter SCART-RCA and HDMI standards at the same time. The ability to simultaneously connect a conventional antenna or cable television signal.

In contact with

Facebook

Twitter

Google+

Classmates

Pyrolytic cleaning of the oven: what it is, how it is carried out, features

Pyrolytic cleaning of the oven: what it is, how it is carried out, featuresMiscellaneous

Pyrolytic cleaning is one of the available methods for automatic cleaning of the oven. After it, all leftover food in the oven turns to ash, which is easy to remove with a kitchen towel. How such ...

Read More
Catalytic cleaning of the oven: what is it, the principle of operation

Catalytic cleaning of the oven: what is it, the principle of operationMiscellaneous

To clean the oven of greasy stains and soot after cooking is a laborious task. In modern ovens, this problem is solved using a catalytic (low-temperature) self-cleaning system. What it is and how ...

Read More
How to choose a mini-oven: parameters, modes, an overview of the best models

How to choose a mini-oven: parameters, modes, an overview of the best modelsMiscellaneous

A wide variety of models of mini-ovens is presented on the market, so depending on your needs you can choose the very unit that suits you in the country or in a small apartment. Read about the sel...

Read More
Instagram story viewer