The robot vacuum cleaner does not spin the side brush: how to fix

In some families, where a robot vacuum cleaner has already been purchased, it has become an indispensable assistant. Smart technology does not distract family members from their own affairs, while quietly removing the surrounding space from dirt and debris. The main thing - take good care of for such a "specialist" in cleaning, because his mechanisms are very vulnerable.

Why isn't the side brush spinning on the Robot Vacuum Cleaner?

Each model of automatic machine has brushes installed on the side parts. They are designed for thorough cleaning in hard-to-reach places. With rotary movements, these devices eliminate small and large debris, animal hair and hair.

Sometimes, in addition to the equipment, a large turbo brush is installed. It makes cleaning faster and better.

Constant contact with debris will break the brushes. They stop spinning, cleaning becomes poor quality. After the passage of the robot, dust and dirt remain, especially in hard-to-reach places.

Common causes of breakdown

The primary cause of the malfunction is considered to be long hair wrap or a large amount of dirt accumulated on the element. The brush simply does not have the ability to make rotational movements, since its mobility is constrained by dirt. Thorough cleaning is required for the device about once a month to prevent this from happening.

A less common cause of malfunction is a broken brush motor. In this case, it also does not spin and does not fulfill its purpose. You can determine this moment after installing a clean or new part in the "body" of the robot vacuum cleaner. If it still does not spin or does not work correctly, the problem is in the engine.

How to fix it?

If the problem lies in excessive pollution, you will have to start cleaning the vacuum cleaner. For this, the brushes are carefully removed from the attachment points. This should be done as carefully as possible so as not to damage the balance.

As a rule, a "comb" is included with the vacuum cleaner. With its help, it is easy to clean the brushes so that they become functional again.

After removing all the dirt and wool, we insert the element into place. He must work properly and not make unnecessary noise. In this case, the breakdown really lay in the blockage, and the problem was solved.

The second case - when the part engine is faulty - requires the help of specialists. We'll have to send the robot vacuum cleaner to the service center and carry out diagnostics. The replacement of parts should also be handled by a master.