Additional features of the shower cabin, care features

Not many can boast of a spacious bathroom. Therefore, shower stalls are purchased. They not only allow you to maintain personal hygiene in a comfortable environment, but also significantly save bathroom space.

At the same time, for long-term operation, it is necessary not only to correctly install and bring the necessary fittings to it, it is important to use the shower stall correctly and regularly take care of it.

How to use the basic functions of the shower stall

Strict adherence to the basic requirements for correct operation is a guarantee of trouble-free and durable work. Therefore, before proceeding with hygiene procedures, you must carefully study the attached instructions. Then check the performance of the booth in a trial mode.

Usually, the use of even modern models with broad capabilities does not cause any particular difficulties. In this case, it is worth paying special attention to some functions and modes that the most expensive cabins have, for example, hydromassage, steam generator or aromatherapy. There are basic rules for using touch control panels:

• activation of any of the functions is accompanied by green illumination of the corresponding buttons;
• if the option was disabled, this will be indicated by the red indicator;
• to turn on the device, you must click on the corresponding area on the touch panel.

Attention! Never expose the touch panel to direct water. If water gets on its internal elements, the panel may completely fail or start to work incorrectly.

Turn on the watering can

Most modern shower stalls are equipped with single lever mixer models. To turn on the water, the lever must be pulled towards you. You can adjust the temperature by turning the knob to the right or left.

Reference. When choosing a suitable shower stall model, pay attention to the diameter of the shower head. The narrow version is not very convenient to use, and the water will drain from the wide watering can for a long time after use.

Turn on the overhead shower

An overhead shower or a rain shower is similar in appearance to a traditional shower head. The main difference lies in its large size and location. Turning it on allows you to create a tropical rain effect.

This is achieved by the structure and distribution of water flows through the grill located on the shower ceiling. This system mixes water with air bubbles. This creates the effect of raindrops.

You can enable this option by pressing the corresponding button on the touch control panel.

How to turn on the hydromassage

Hydromassage is not only a pleasant option, but also a useful one. However, it should be borne in mind that it cannot replace a full-fledged massage procedure.

It is turned on by pressing the "Injectors" button.

The intensity of the injectors is regulated by additional pressing. The third press will turn on the nozzles at the bottom of the structure. And if you press it four times, all the elements of the hydromassage will turn on at the same time.

We start ventilation

The shower stall is an enclosed space, so the humidity level rises quickly in it. In the absence of ventilation, mold or mildew will form on the surface over time.

"Turkish sauna"

Some models of shower stalls have a steam generator. It allows you to use the Turkish Bath option. If you press the "Steam" button, the generator will begin to fill the space of the booth with warm steam. The fact that there is no water in the system will be indicated by a red indicator.

Additional features of the shower cabin

Most modern models are equipped with the following options:

• playback of audio files, radio;
• aromatherapy;
• the ability to use built-in telephony.

To use aromatherapy, first open a special box and place your favorite essential oils or essences in it. When the steam generator is switched on, the "Aromatherapy" option will automatically work.

The microphone and speaker built into the booth are not of good quality and therefore cannot provide proper sound transmission. In addition, telephony receives a signal rather poorly.

For them, there are also corresponding keys on the dashboard. It should be borne in mind that when using telephony, the injectors and ozonator will stop functioning.

The nuances of using a shower stall

Following simple recommendations will not only make the use of the shower more comfortable, but also extend its life:

1. Check the mains power supply before use.
2. The control panel requires careful handling. Don't push the buttons too hard. If it is out of order, contact the service center.
3. Make sure that the ventilation system is working properly. Otherwise, mold or mildew may develop on the surface.
4. If acrylic is used as a coating material, then the water temperature should not exceed 60 degrees.

Features of booth care

The weakest structural element is the pallet. To avoid damaging it, do not jump or drop heavy or sharp objects.

Particular attention must be paid to the wheels of the sliding doors. Refrain from sudden movements when opening the booth. Otherwise, it will be necessary to replace the doors, and this is quite an expensive pleasure. To keep them presentable, wipe them with a soft cloth after each use.

If the booth is equipped with an ozonation option, then it can be used to disinfect surfaces. To do this, purchase a special antimicrobial agent. The pallet can be tidied up with toothpaste.

Do not use powders or other cleaners that contain coarse abrasive particles. It is advisable to take care of the shower stall with soft gels or creams.

Don't forget about rubber construction. Over time, mold or fungus may develop on their surface. Therefore, they should be thoroughly cleaned.

Subject to all the recommendations, as well as timely care, the shower stall will delight you for many years, allowing you to carry out hygiene procedures with complete comfort.