Russia, Moscow region, Moscow+79041000555
It takes ~ 1 minute to readSolid deposits resulting from repeated boiling of water infuriate and upset every housewife. Using a special water filter or systematic rinsing of the vessel, you can only slightly slow down the rate of formation of deposits. What kind of descaler will be the most effective and give the teapot its original appearance?
Scale - what is it
The formation of solid deposits on the walls of the kettle is facilitated by water of increased hardness, which has a very bad effect on all household devices and increases the consumption of detergents and cleaning agents. In the process of increasing the temperature of the water, deposits of salts and lime are formed on the surface of all kinds of heaters, which are fixed quite tightly on them.
If you do not take measures and do not apply any anti-scale agent, then even the highest-quality and most expensive unit will eventually be destroyed and completely disabled. Therefore, this trouble must be neutralized without fail. After all, her education leads to the following consequences:
- Electricity consumption increases due to the increased heating time;
- Turning off the electric kettle even in cases of insufficient heating;
- Deterioration of taste and quality of water;
- Complete failure of the device.
How to deal with limescale
If you make it a rule to systematically clean the device from scale, learn how to properly care for it, then deposits on its walls will not be such an unpleasant problem for the hostess. But how do you get rid of limescale in your kettle in the most effective way? There are several methods of dealing with limescale deposits:
- Chemical. The most affordable and convenient method using acid-containing components to neutralize deposits.
- Mechanical. This method uses special softening filters or ionic magnetic water converters.
- People's. An inexpensive and effective method, for the use of which there is always a means for neutralizing scale in every kitchen.
Special products for descaling
On the shelves of household chemicals and Internet hypermarkets in Moscow, there is a huge amount of chemicals that help neutralize annoying deposits. Usually they contain soda and a group of acids. They are produced in the form of a liquid concentrate or a powdery substance. The preparations are applied to the inner surfaces of the vessel, and then the kettle is boiled by adding water to it in full.
When choosing a drug, it is necessary to carefully study its composition and choose exactly the remedy where there are minor elements. These additives will provide additional protection against corrosion and rust formation in the container. What is the best kettle descaler to buy? The most effective and popular with the consumer are:
- Cinderella;
- Anti-scale Plus;
- Bubble Ice;
- OPTIMA PLUS;
- MAGIC POWER anti-scale;
- SELENA.
It is worth remembering that all chemicals that do an excellent job with decalcification can get into the stomach, causing harm to health. Therefore, after using them, the container must be thoroughly rinsed under running water to avoid poisoning.
Home remedies for descaling
An excellent alternative to harmful chemicals are folk remedies for descaling in a teapot.
- Sodium bicarbonate. The most common baking soda will be a great help in the fight against plaque neutralization. To do this, pour several spoons into a full vessel, bring it to a temperature of 90 degrees and drain. Then pour half a glass of vinegar into the kettle, add water and bring to a boil again. The procedure is carried out 2-3 times.
- Lemon. Pour 50 g of citric acid into a vessel filled with water and leave for several hours. Then change the water and boil again. However, this method is not suitable for stainless steel kettles, as the acid makes the surface of the walls rough. And this provokes the formation of fresh scale.
- Sparkling water. Amazingly, the beloved citro is an excellent remedy for kettle scale. For this method, Pepsi and Sprite are suitable. Pour the drink into a vessel, and boil after 15-25 minutes.
Mechanical descaling method
Compact designs with permanent magnets such as the Aquashit device work to reduce water hardness and cleanse it from excess salts. These converters can be used on any device where scale can form. When applied, solid deposits simply dissolve and subsequently do not form at all. You can buy such devices in online stores in Moscow.
Scale prevention
In order to prevent troubles in the form of solid deposits from forming on a newly purchased kettle for as long as possible, you must:
- Do not bring the water remaining in the vessel from the previous heating to a boil. In addition to the formation of strong scale, such a liquid is very harmful to health;
- In no case should you boil a vessel that is less than half full;
- Do not allow foreign objects to enter the container;
- Do not process the inner surface with hard brushes and abrasives;
- Do not try to clean the heating element itself with foreign objects;
- Every 7-10 days, carry out a preventive cleaning of solid deposits
It is worth knowing that with none of the above methods, you can not add a single agent to a vessel with very hot water. And chemical treatment should be carried out only by wearing gloves.
Video: looking for the best descaler
With great interest I always read your comments to my articles. If you have any questions, do not hesitate to ask them, leave, please, Your feedback in the form below. Your opinion is very important to me. Thanks to your criticism and thanks, I can make this blog more useful and interesting.
I would be very grateful if you rate this post and share it with your friends. It's easy to do by clicking on the social media buttons above. Do not forget the article you like Add to bookmarks and subscribe to new blog posts on social networks.
