How to connect a tricolor to a TV: connecting to an antenna, setting up and connecting a receiver

Tricolor is a satellite dish that allows you to connect several hundred channels in high definition. The plate is mounted on the roof or wall of the house, a tuner, a convector is installed. Then you can connect the tricolor to the TV. It is possible to connect multiple devices to the antenna.

Signal sources

To watch channels on TV, you need to connect the antenna and receiver. This is done through special holes that are located on the devices. There are several types of connection:

1. RF is an old format that was used to connect an outdoor or indoor antenna.
2. Composite (AV) is a popular type that can be found on any device. In everyday life, they are called tulips. Multi-colored cables will help you connect the receiver to your old TV.
3. S-Video - the connector is presented in the form of a keyboard or mouse connection to the system unit. It complements expensive TVs and receivers.
4. Scart is a 21-pin wide cord connector.
5. Y Pb Pr - consists of several cables of different colors. It can transmit a picture in 1080 i resolution. Each color sends a different signal: green for HDTV, red for HDTV Cr / Pr Chroma, blue for HDTV Cb / Pb Chroma. There are additional red and white cables for audio channels.
   instagram viewer
6. HDMI is a modern signal transmission cable. Its advantage is that the picture is shown in the form in which it is broadcast by the operator. There is no transformation or change.

Gradually, the Tricolor TV company is switching to the last signal transmission option. That is, users can enjoy the picture in HD format.

Antenna connection

This is the easiest part. To connect devices you need:

1. Prepare a coaxial cable.
2. Unscrew the braid on the insulating wire, exposing the cable core in the center.
3. Connect connector F to both ends of the wire.
4. Connect to antenna.
5. Connect the other end to the LBN in input of the receiver.
6. Fasten the cable to the plate.

At the end of the procedure, it is necessary to check the reliability of the fastening, since the quality of the received signal depends on this. If you need to connect the antenna to a second receiver, then you need to buy a two-tuner set-top box and a client receiver.

The connection process is pretty straightforward. Necessary:

1. Plug the cord into the appropriate slots.
2. Configure the receiver.

In order to make the correct connection of two receivers, you need to go to the network section and select "server". There are options when it is not necessary to connect the tricolor receiver to the TV. An antenna, a device with a Smart function, a special card and a module will be enough.

In this case, in order to make the connection, you must:

1. Detect the slot on the back of the TV. In some cases it is necessary to install a CL adapter. It comes with a TV set.
2. Insert the SIM card into the module.
3. Push the slot into the module as far as it will go.
4. Check the functionality of the device.

After the performed actions, a picture should appear. If this does not happen, then it is necessary to call the TV technician. You can do this by calling 88005000123. The work of a specialist is paid.

TV connection

Before connecting the tricolor set-top box to the TV, you need to check it for outputs. The rear panel may contain: LNB IN - connection to the convector, LNB OUT - antenna connection, power socket, etc. The set of connectors may differ depending on the type of receiver.

Additionally, you need to view the firmware version. Some of them allow you to broadcast the picture to all outputs. In certain cases, you will have to choose which output to send the signal to.

The high-frequency cable is inserted into the LNB OUT connector, the antenna is connected. The TV and receiver turn on. Boot will appear on the screen followed by the channel number. The client needs to make the settings and wait for the inscription "No signal". It will mean that it was possible to connect the tricolor receiver to the TV.

In a similar way, the connection with the rest of the cables is carried out, the setting is carried out. If the TV is old, then it is connected with a "tulip". It has three outputs in different colors. The first is responsible for the video picture, the second and third are responsible for the audio signal. This connection option will not be able to transmit the picture in high quality.

Tricolor can be connected to two TVs using the following algorithm of actions:

1. Two cables are connected from the antenna to LBN in 1 and 2. If you cannot stretch the wires to the receivers, then you can make a jumper. In this case, fewer channels will be shown on one of the devices.
2. The connector is selected on the TV. Now you need to make the initial settings.
3. Connect two set-top boxes using a UTP cable. It plugs into Ethernet connectors. Connect the second set-top box to the TV and perform the setup.

If it was possible to connect the tricolor to the TV, then in the "network settings" item there will be a server with which you need to connect. You need to select it and click "Search". The second receiver will have to be updated:

1. Set the channel to number 333 "telemaster".
2. Wait 5-10 minutes.
3. The update column will appear.
4. Confirm the action.
5. Wait for the end.

You can watch channels on different devices using wi-fi. For this, the necessary settings are set in the receivers, the "Play Tricolor" program is downloaded. Next, you need to connect to the Internet and set the settings in the application.

Different cables are used to connect the tricolor receiver to the TV. The first step is to connect the antenna, then the receiver. Initial setup is mandatory. Tricolor can connect to multiple TVs and other devices.