How to disassemble a washing machine yourself without the help of a master

To do homework, many different devices have been created today. Among them, the irreplaceable washing machine stands out. Without her, no decent housewife can imagine a normal life for herself. Although modern manufacturers are trying to produce new washing machines of very high quality, there is a limit to everything. After long-term work, many parts wear out and often fail. In this case, renovations are required, which can be a heavy burden on the home budget. However, there is a simple option in which it becomes possible not to pay money at all - to do everything with your own hands.

How to disassemble an imported side loading or horizontal loading washing machine

Washing machines are manufactured using modern technologies. And not everyone will be able to cope with their disassembly. Especially for those who do not have experience with the repair of complex mechanisms.

All washing machines perform the same functions, but have different design features. In one case, linen is laid in them from above, and in the other from the side. As a result, the sequence of work is significantly different from each other. Therefore, when disassembling, and even more so during repairs, extreme caution, accuracy and special care are required.

Dismantling a side-loading or front-loading washing machine

For this tools required:

1. Sockets for loosening nuts and bolts.
2. Long knob or multiple attachments.
3. Small bearing puller.
4. Phillips and flat head screwdrivers.
5. Medium hammer.
6. Various wrenches.
7. Powerful pliers.

Preparation

Before starting to disassemble the washing machine, you must create comfortable conditions for work. As a rule, the equipment is located in the bathroom, where limited space will not allow normal work. In this case, you first need to move the machine away from the wall, and then remove the hoses. But first, you must close the line to turn off the cold water. Usually, the apartment always has a tap on the central pipeline. It just needs to be rotated 90 degrees.

Often, when connecting the washing machine, an additional tap is installed, which is very convenient. If you close it, then the water supply throughout the apartment will not stop, but only the machine will be turned off. The next step is to loosen the clamp and remove the hose. To do this, it is best to tighten the lower nut with pliers and unscrew the screw a little with a Phillips screwdriver. The second pipe, which goes to the drain, is even easier to disconnect. To do this, you just need to unscrew the nut by hand.

After disconnecting the hoses, it is better to move the machine to a more spacious room, where the room will allow you to freely disassemble. Upon completion of this work, you will need to prepare the necessary tool. To do this, you need a screwdriver, heads, a driver, a hammer and pliers. If the machine works for a very long time, but never understood, then you will definitely need a puller, since old bearings are quite difficult to film without this device.

Parsing an Italian washing machine

Disassembly procedure:

1. Top cover.
2. Counterweight.
3. Receiving box for powder.
4. Control Panel.
5. Right valve with tubing.
6. Powder dispenser box.
7. Back cover.
8. Valve.
9. Belt.
10. Engine.
11. Wiring.
12. Shock absorbers.
13. Terminals from the pump.
14. Pipe branch.
15. Round window cuffs.
16. We take out the drum.

To learn how to disassemble imported machines with side or horizontal loading, it is best to use the example of Indesit. It is a very famous model that has good performance, durability and an excellent reputation. For 10 years of intensive work, it has practically no serious breakdowns. But there comes a time when the oil seals deteriorate from old age and the bearings begin to dangle. This is the most common breakdown. To fix it, you must first disassemble the machine, and then replace obsolete parts.

Disassembly of the washing machine begins with the top cover. First, unscrew two screws from the back. Then the platform is pushed back a little, and then it is calmly removed upward. Next, unscrew the three bolts and remove the counterweight from the machine. Then take out the powder receptacle box and unscrew all the screws that hold the control panel. If you pick it up, it will come off easily.

After that, we disconnect all the terminals, and also take out the right valve and take out the large powder dispenser box. But before you lift it, you need to remove the branch pipe, which is attached to one elastic band. Then we remove the round cuff, where the door is located. Removing it is easy. First, pick out the gum with a screwdriver and take out the clamp in the form of a wire. And then the rubber can be easily removed towards the drum.

At the next stage, we go to the back, where we immediately unscrew all the cover bolts. Next, we remove the belt and go to the motor. It is fastened with two screws that need to be removed. But first you need to disconnect all the wiring. When all fasteners are removed, the motor will fall to the floor. It's easy to get it, you just have to tilt the machine and pull out by the shaft. At the back there is a pipe with a valve where cold water is connected. It is attached to one screw, which also needs to be unscrewed, and then remove the entire device.

When all the work is done, you need to put the machine on its side and unscrew the shock absorber nuts. Then you will need to remove the pipe from the pump, and also disconnect all the wiring. After that, we put the body back in an upright position and calmly pull the entire drum up from the machine. On this, the main disassembly is considered complete, and you can proceed directly to the repair.