Electricity from nothing: how to get energy from air and earth with your own hands

One of the greatest assets of the modern world is electricity. Due to the rise in the cost of energy resources, humanity is trying to find alternative and affordable energy sources, tending to the most radical solutions. Some enthusiasts put a lot of effort into getting electricity out of nothing, and their ideas sometimes look just crazy.

general information

For many years, scientists have been looking for an alternative source of electrical energy that will make it possible to obtain electricity from available and renewable resources. Tesla was interested in the opportunity to extract valuable resources from the air in the 19th century. But if enthusiasts of past centuries did not have at their disposal as many technologies and inventions as modern researchers, today the possibilities for the implementation of the most complex and insane ideas look quite really. Alternative electricity can be obtained from the atmosphere in two ways:

• thanks to wind turbines;
• with the help of fields that permeate the atmosphere.

Science has proven that electrical potential is able to accumulate in air over a certain period of time. Today, the atmosphere is so permeated with various waves, electrical appliances, as well as the natural field of the Earth, that it is possible to obtain energy resources from it without much effort or complex inventions.

The classic way to extract energy from the air is a wind generator. Its task is to convert wind power into electricity, which is supplied for domestic needs. Powerful wind turbines are actively used in leading countries of the world, including:

• Netherlands;
• The Russian Federation;
• USA.

However, one wind turbine is capable of serving only a few electrical appliances, so huge fields of such systems have to be installed to power settlements, factories or factories. In addition to significant advantages, this method also has disadvantages. One of them is the inconstancy of the wind, which makes it impossible to predict the level of voltage and accumulation of electrical potential. Among the advantages of wind generators are:

• practically silent work;
• lack of harmful emissions into the atmosphere.

Reality or myth

When it comes to getting energy out of thin air, most people think that this is outright nonsense. However, it is quite possible to extract energy resources from literally nothing. Moreover, in recent years, informative articles, drawings and diagrams of installations have been appearing on thematic forums that make it possible to implement such an idea.

The principle of operation of the system is explained by the fact that the air contains some scanty percentage of statistical electricity, only you need to learn how to accumulate it. The first experiments on the creation of such an installation were carried out in the distant past. As a striking example, we can take the famous scientist Nikola Tesla, who has repeatedly thought about affordable electricity from nothing.

The talented inventor devoted a lot of time to this topic, but due to the lack of an opportunity to preserve all the experiments and research on video, most of the valuable discoveries remained secret. Nevertheless, leading experts are trying to recreate its developments, following the found old records and testimonies of contemporaries. As a result of numerous experiments, scientists have built a machine that opens up the possibility of extracting electricity from the atmosphere, that is, from practically nothing.

Tesla proved that there is a certain electrical potential between the base and the raised plate of metal, which is static electricity. He also managed to determine that this resource can be accumulated.

Then the scientist designed a complex device capable of storing a small amount of electrical energy using only the potential that is in the air. By the way, the researcher determined that a small amount of electricity contained in the air appears when the atmosphere interacts with the sun's rays.

Considering modern inventions, one should pay attention to Stephen Mark's device. This talented inventor has come up with a toroidal generator that holds much more electricity and surpasses the simplest designs of yesteryear.

The resulting electricity is quite enough for the functioning of weak lighting devices, as well as some household devices. The generator operates without additional make-up for a long period of time.

Simple schemes

Wanting to get atmospheric electricity with your own hands, you should consider various schemes and drawings. Some of them are so simple that even a novice inventor can easily implement them and create a primitive installation. It is important to note that modern networks and power lines cause additional ionization of the airspace, which increases the amount of electrical potential contained in the atmosphere. It remains to learn how to extract it and accumulate it.

The simplest scheme involves using the ground as a base and a metal plate as an antenna. Such a device can store electricity from the air, and then distribute it for solving household tasks.

When creating such an installation, there is no need to use additional storage devices or converters. An electrical potential is established between the metal ground and the antenna, which tends to grow. However, due to its variable magnitude, predicting its strength is very problematic.

The principle of operation of such a device is somewhat reminiscent of lightning - when the potential reaches its peak, a discharge occurs. Because of this, an impressive amount of useful resources can be extracted from the earth and the atmosphere.

Among the advantages of the above scheme are:

1. Ease of implementation at home. Such an experience can be easily accomplished in a home workshop using the materials and tools at hand.
2. Cheapness. When creating a device, you do not have to buy expensive fixtures or components. It is enough to find an ordinary metal plate with conductive properties.

However, besides the pluses, there are also significant disadvantages. One of them is the high danger associated with the inability to calculate the approximate number of amperes and the strength of the impulse. Also in working order, the system creates an open ground loop capable of attracting lightning. It is for this reason that the project has not gained mass distribution.

Stephen Mark's Generator

There is another interesting and working scheme - a TPU generator that allows you to extract electricity from the atmosphere. It was invented by the famous researcher Stephen Mark.

With this device, you can accumulate a certain electrical potential for servicing household appliances, without using additional make-up. The technology was patented, causing hundreds of enthusiasts to try to replicate the experience at home. However, due to specific features, it was not possible to launch it into the masses.

The operation of the Stephen Mark's generator is carried out according to a simple principle: the formation of a resonance of currents and magnetic vortices occurs in the ring of the device, which cause the appearance of current shocks. To create a toroidal generator, you need to adhere to the following instructions:

1. The first step is to prepare the base of the device. As it you can use a piece of plywood in the shape of a ring, a piece of rubber or polyurethane. You also need to find two collector coils and control coils. Depending on the drawing, the dimensions of the structure may differ, but the following indicators are the best option: the outer diameter of the ring is 230 mm, the inner diameter is 180 mm. The width is 25 mm, the thickness is 5 mm.
2. It is necessary to wind the inner collector coil using stranded copper wire. For better interaction, a three-turn winding is used, although experts are sure that one turn will be able to power a light bulb.
3. You should also prepare 4 control coils. When placing these elements, you must observe a right angle, otherwise interference with the magnetic field may occur. The winding of these coils is flat, and the gap between the turns is no more than 15 mm.
4. When winding control coils, it is customary to use single-core wires.
5. To complete the installation of the last coil, insulated copper wire should be used, which is wound over the entire area of ​​the base of the structure.

After completing the above steps, it remains to connect the leads, setting the capacitor to 10 microfarads before this. The circuit is powered by high-speed transistors and multivibrators, which are selected taking into account the size, type of wires and other design features.

Methods for extracting energy from the earth

It's no secret that the easiest way to get electricity is from a solid and humid environment. The most popular option is soil, which combines solid, liquid and gaseous media. Small minerals contain water droplets and air bubbles. In addition, there is one more unit in the soil - a micelle (clay-humus complex), which is a complex system with a potential difference.

If the outer shell creates a negative charge, then the inner one is positive. Micelles with a negative charge attract positive ions to the upper layers. As a result, electrical and electrochemical processes are constantly taking place in the soil.

Given the fact that the soil contains electrolytes and electricity, it can be considered not only as a place for the development of living organisms and growing crops, but also as a compact power plant. Most rooms concentrate an impressive electrical potential in this shell, which is supplied by means of grounding.

Currently, there are 3 methods used to extract energy from the soil at home. The first consists in the following algorithm: neutral wire - load - soil. The second involves the use of a zinc and copper electrode, and the third uses the potential between the roof and the ground.

In the first version, the voltage is supplied to the house using two conductors: phase and zero. The third conductor, grounded, creates a voltage of 10 to 20 V, which is enough to service several bulbs.

The next method is based on obtaining energy only from the earth. To do this, you need to take two rods made of conductive materials - one made of zinc and the other made of copper, and then install them in the ground. It is advisable to use the soil that is in an isolated space.

Finding industrial devices for obtaining electricity from the ground is problematic, because almost no one sells them. But it is quite possible to create such an invention with your own hands, following ready-made diagrams and drawings.

Useful Tips

When creating a device for the extraction of electricity from the air, it is necessary to remember a certain danger, which is associated with the risk of the appearance of the principle of lightning. To avoid unforeseen consequences, it is important to observe the correct connection, polarity and other important points.

The work on the manufacture of a device for obtaining affordable electricity does not require large financial costs or efforts. It is enough to choose a simple scheme and follow the step-by-step guide exactly.

Of course, it is problematic to create a super-powerful device with your own hands, since it requires more complex circuits and can cost a tidy sum. But as for the manufacture of simple mechanisms, then such a task can be realized at home.