How to get electricity from the earth for free with your own hands: schemes and methods, energy according to Belousov

The earth's interior has an almost inexhaustible potential, and if desired, they can be used as a source of energy. There are several ways to get electricity from the ground. These schemes may be radically different from each other, but the result will be similar. It consists in uninterrupted supply of electricity with minimal costs of obtaining it.

Natural energy sources

Recently, humanity has been trying to find more affordable alternatives to supply its own home with electrical energy. And all because the standard of living is growing rapidly, and along with it, the costs of servicing residential premises by the usual methods increase. That is, it is the high cost and constant rise in prices for utilities that makes people look for more budgetary energy sources that can also provide light and heat to their homes.

Currently, windmills that transform energy from the air, located in open spaces, are especially popular, solar panels that are installed directly on the roofs of houses, as well as all kinds of hydraulic systems of varying degrees difficulties. And here the idea of ​​extracting energy from the bowels of the earth is for some reason extremely rarely used in practice, except when conducting amateur experiments.

Meanwhile, already now, folk craftsmen offer several simple, but at the same time quite effective methods of extracting electricity from the earth for a home.

The easiest ways of mining

It is no secret that electrochemical processes are constantly taking place in the soil (in contrast to the air environment), the reason for which lies in the interaction of negative and positive charges emanating from the outer shell and subsoil. These processes allow us to consider the earth not only as the mother of all living things, but also as a powerful energy source. And in order to use it for everyday needs, craftsmen most often resort to to three proven methods of producing electricity from the earth with your own hands. These include:

1. Zero wire method.
2. Method with the simultaneous use of two different electrodes.
3. Potential of different heights.

In the first case, the provision of a dwelling with a voltage sufficient for at least several lamps to burn is carried out due to the phase and neutral conductor. But in order to achieve this goal, the light bulb must be connected not only to zero, but also to ground, because if the living space is equipped high-quality grounding circuit, then most of the consumed energy goes into the soil, and such a contact helps it partially from there to return.

​

In fact, we are talking about the most primitive scheme "neutral conductor - load - ground", in which the generated energy is not output to the general instrument meter, that is, its use is free. However, this method also has a significant drawback, which is more than a low voltage fluctuating in the range from 10 to 20 volts, and if you want to increase this indicator, you will have to improve the design using elements more complicated.

The method of generating energy by using two different electrodes is even simpler, since it only uses soil for its practical application. Naturally, this cannot but affect the final result of the experiment, therefore, most often such schemes do not make it possible to obtain voltage is more than 3 volts, although this indicator tends to vary in one direction or another, depending on humidity and composition soil.

To carry out the experiment, it is enough to immerse two different conductors in the soil (usually rods made of copper and zinc), which are designed to create a difference between negative (zinc) and positive (copper) potentials. A concentrated electrolyte solution, which you can prepare yourself using distilled water and ordinary table salt, will help to ensure their interaction with each other.

The level of the generated voltage can be raisedif you immerse the electrode rods deeper and increase the salt concentration in the solution used. The cross-sectional area of ​​the electrodes themselves plays an important role in this issue. It is noteworthy that the soil abundantly watered with electrolyte can no longer be used for growing any plants and crops. This point must be taken into account, providing high-quality insulation in order to avoid salinization of the adjacent areas.

The potential difference can also be provided by such elements as the roof of a private house and the ground, but with provided that the roof is made of any metal alloy, and the ground surface is covered ferrite.

However, this method will not give significant results, since the average voltage that can be obtained in this way is unlikely to exceed 3 volts.

Alternative technique

If we consider the globe as one large spherical capacitor with negative internal potential, and its shell as a source of positive energy, the atmosphere as an insulator, and the magnetic field as an electric generator, then to obtain energy it will be enough just to connect to this natural generator, providing a reliable grounding. In this case, the design of the device itself should without fail include the following elements:

• A conductor in the form of a metal rod, the height of which must exceed all objects in the immediate vicinity.
• A high-quality ground loop to which a metal conductor is connected.
• Any emitter capable of allowing electrons to escape freely from a conductor. A powerful electric generator or even a classic Tesla coil can be used as this element.

The whole point of this method is that the height of the conductor used must provide such a difference. of opposite potentials, which will allow the electrodes to move not downwards, but upwards along the immersed in the ground metal bar.

As for the emitter, its main role is to release the electrodes, which enter the environment already in the form of pure ions.

And after the atmospheric and electromagnetic potential of the earth are equal, the generation of energy will begin. At this point, a third-party consumer must already be connected to the structure. In this case, the indicator of the current strength in the electrical circuit will completely depend on how powerful the emitter is. The higher its potential, the more consumers can be connected to the generator.

Naturally, it is almost impossible to build such a structure within settlements on your own, because everything rests on the height of the conductor, which should exceed trees and all structures, but the idea itself can become the basis for creating large-scale projects that allow you to get electricity from the ground for nothing.

Electricity from the ground according to Belousov

Particularly noteworthy is the theory of Valery Belousov, who for many years has been studying deep study of lightning and the invention of the most reliable protection against this dangerous natural phenomena. In addition, this scientist is the author of several books, unique of their kind, which set out an alternative vision of the process of generating and absorbing electrical energy by the earth's interior.

Double earthed circuit

One of the ways to get electricity from the ground involves the use of double earthing, which allows you to remove energy from the ground for domestic purposes for free.

In this case, the scheme assumes the presence of a single passive ground loop without an activator, the main task of which is consists in the acceptance of a one-sided charge in the first half-period with its further return back at the transition to the phase of the second half-period. That is, we are talking about a kind of clipboard, the role of which can be played by an ordinary gas pipe connected to a typical apartment.

Construction of the structure and the essence of experience

Subsequent assembly of the structure involves performing the following manipulations:

1. To ensure the passage of wave frequencies, a transformer coil must be installed on the passive circuit, the main purpose of which is to block high-frequency charges. Any coil can be used, which is recommended to be supplemented with several turns of insulated wire.
2. Wiring is performed, one end of which is supplied to the gas pipe, which acts as a passive circuit, and the other is attached to the condenser, as a result of which, wave oscillations should be supplied and returned back while blocking the ingress of alternating current into chain.
3. In the intermediate break, two capacitors are installed, which should be located "pluses" along relation to each other, which will make it possible to make all the energies flowing in the circuit play the role of a single capacitor.
4. A conventional 220-volt LED light is connected to the capacitor winding, which should blink if everything was done correctly.

At this point, the experience can be considered complete. Its main goal was to demonstrate the presence of several energies in a circuit at once, one of which is not electrical.

The author called this kind of hitherto unknown energy "white", comparing it with a blank sheet of paper on which if you wish, you can impose anything you like, opening up fundamentally new possibilities. But the main idea that the author highlights is that all energies on the planet flow individually according to their own laws, but all this happens in a single space.