Content
- 1 As the curvature of the mask?
- 2 The curves of the walls and ceiling joints
- 3 What if the ceiling wavy?
- 4 Installation of decorative beams
Many people in the repair process are paying much attention to leveling the surface and it is the right decision, because in many respects the situation affects the aesthetic component. The uneven surface is always evident, and no kind of finish will not be able to solve this problem, so how can that be?
As the curvature of the mask?
When it comes to major repairs, it is best to perform all work with maximum quality, to forget about them and not return. But there are other solutions that require less effort and cost, so it is necessary to consider all the possibilities. More often resorted to the color of the game, changing the texture of the surface and add additional elements.
The curves of the walls and ceiling joints
If the problem lies in the joint, it is best to use a floor plinth. The modern market offers a huge variety of materials which are different in width and shape. The fillet may be made from foam, plastic and wood. It is important to stay straight and not repeat the curvature of the ceiling after the installation of a fillet, so you need to choose a high-quality material. Is attached using an adhesive material, sometimes advisable to use gypsum plaster. And then the element is pressed against the wall and ceiling.
When used to coat the installation, in the future it must be removed, and this can be done:
- Plaster on the wall painted in the color of the entire surface, and the baseboard paint the ceiling color.
- Skirting the color contrast, while the plaster painted in the color of the adjacent grounds.
What if the ceiling wavy?
Sometimes observed over the entire surface elevation changes, they are the same wavelength. It is often associated with poor alignment of the base. a variety of options can be used depending on the scale of the problem.
Textured paint coating is used in the situation when the waves reach the drop to 3 millimeters. Work hand and applied by roller coating. But it is important to pre-primed substrate.
Embossed wallpaper - is another option that deserves consideration. Especially effective is the use of 3D drawing.
Installation of decorative beams
This technology is more suitable for rooms with high ceilings, where there are serious defects in the surface. The essence of the method is to create a decorative design on the ceiling, which is original and beautifully decorated.
