Repair - event expensive and costly, especially for people who are categorized as "middle class". It is not surprising that the majority of owners of apartments and houses are trying to save money on materials. Some of them choose the cheapest ceilings. What threatens this avarice, and what challenges will face, will be discussed in the article.
What fabrics are the cheapest
The cost depends on several factors simultaneously:
- web material manufacturing (film coatings are much cheaper compared to tissue products);
- surface width (narrow overlap of 140 cm are 30-50 p. per square meter less than the broader analogues);
- Invoice (satin and matte models are less likely, and in the assembly held against them, saving is easy, but the glossy versions will cost more money);
- color (classic white coatings are cheaper than bright variation);
- The manufacturer (Chinese goods - the cheapest, and European - expensive).
5 deficiencies cheapest tension ceilings
Chinese type of matte coating film width of 140 cm are considered the most accessible in terms of cost. But their use can result in some problems.
- Deformation during transport. Cheap models are low-quality composition that can cause damage during transportation. Therefore, it is likely that later still have to buy a certain number of coatings.
- The complexity of the installation. Budget models poorly glued and may even fall from the ceiling. To their "wear" on the ceiling, will have to seriously try.
- Toxicity. Environmental security - this is not about cheap design. They emit an unpleasant chemical smell and negative impact on the health of all family members.
- The short life span. Models can be easily damaged and instantly lose their original consumer properties. Therefore, they need to be changed more often than the expensive high-end products.
- Unattractive appearance. Dear variations are much more solid and presentable.
Thus, buying the cheapest ceilings, the owner of a house or apartment risk facing a lot of problems.
