Renovated probably encountered every person, and in the process, many difficulties and all sorts of questions. For example, the plastering of the surface - it is always aortic problem. It is necessary to align quality in the room any surface, and prepare it, whether it be ceiling or wall.
At the moment, there is a sequence alignment of the walls and ceiling. Primarily it is plaster, and it defines a plane geometry. This is followed by starting putty, which makes the surface smooth. And after that it will be possible to glue wallpaper to the wall. But when it comes to paint or decorative plaster, using a thin wallpaper, you can not do without the finishing putty.
alignment walls
In the process of plastering the most important step is to precisely align. And it should be said that in old houses almost always a wall of debris, so the required vertical alignment. That is, if all the pits and defects are eliminated, it is still the owner may find it difficult, for example, at the corners of tiles will simply disperse, will be a gap between the intermediate casing and the wall, it will be impossible to put in a corner of a piece of furniture, and so Further. That is, even if the surface is plastered with high quality and it is free of defects, but the curvature of the problem and the obstruction still will not be solved. So you should also take into account the geometry of the room, this is extremely important.
To date, There are two types of plaster:
- With the use of beacons. This approach is in addition to smoothing equaled vertical wall. On the wall is necessary to put beacons using a level, and to these beacons in the future be applied plaster.
- Visual. The main objective of this paper is that there are no holes and bumps on the surface. This option is more simple and requires less investment. This approach is appropriate only for technical room.
Withdrawal angles
It is also worth remembering that it is important to observe the corner. This is primarily due to the use of mounted furniture, all of it has a rectangular shape, and that this or that object became tight, it is necessary to observe an angle of 90 degrees.
Often the problem lies in the use of mixtures of poor quality or composition gets too thin and poorly adheres to the surface. Sometimes in the process of mixing formed clumps, which can already be seen only after application, and all of this affects the appearance.
If their knowledge and skills are not enough to perform the procedure, it is best to hire a qualified professional who has the skills and experience in such work.
