Why under air bubbles appear wallpaper

At the moment, for the walls often use wallpaper, it is not surprising, because the stuff is really versatile and fit into any room. In addition, the modern market offers the consumer a wide range of different options. But it is necessary to know that sometimes taping - is a complex process and need to abide by the technology.

For example, after pasting blisters on the surface, which detracts from the appearance, but also in the future can all lead to separation of the material, that is, the problem needs to be solved. But it is also important to know the basic reasons for which may appear air bubbles.

Main reasons

Due to the nature of technology pasting it bubbles at the end of work - is the most common. And it is worth to know what type of wallpaper do not play any role, absolutely any type subjected to a similar issue. And in order to avoid serious problems in the future, it is best to read the instructions from the manufacturer. Luba problem is easier to prevent than to deal with the consequences, so it is necessary to consider the main reasons why the wallpaper peel off:

1. Wrong choice of material. It is important to the choice of finishing material to approach responsibly, it should not be neglected the recommendation of the manufacturer, do not be shy to consult a specialist. It should also choose the right adhesive composition to match the selected type of wallpaper. That is, if after the last repair was adhesive for paper wallpaper, and it was used for non-woven, the problems can not be avoided.
2. Failure to comply with temperature control. It is important to know that only new wallpapers are sensitive to temperature changes and drafts, high humidity and even UV. That is, in the process you need to close all the windows in the room, that there was no draft. With regard to temperature, it should vary in the range of 15 to 23 degrees.
3. Roller blade expands when exposed to moisture. This is a natural reaction of wallpaper and this can not be avoided, but sometimes Soaked band can be stretched uniformly, and this leads to the formation of bubbles.
4. Too much glue or roll long life lay spread with adhesive. In this case, the band necessarily stretch, resulting in problems in the future.
5. The uneven application of the adhesive to the surface.