Rust penetrates deep into any surface. Gets hurt when the wallpaper, which have been recently pokleit appear rusty spots. Such a defect is formed in the plaster. The reasons for its occurrence will be discussed in today's article.
Reasons for the formation of rust
1) Effects of foreign substances. For example oil or grease. News for food.
2) Problems with the water supply. Often breaks the pipe or flood the neighbors from the top floor. Moisture adversely affects the plaster.
3) Leaking roof of the house. Upon detection of such a problem, please contact the management company home with a request to make major repairs to the roof.
4) increased humidity in the room. Because of the dampness not only appears mold, but rust on the wallpaper.
5) Supporting beacons. During plastering, so-called beacons. It creates a grid on which you can quickly deal with the task. However, ancillary items must be removed at the end of repair work. Over time, poppies can rust, what will cause the emergence and further spread of rust.








How to get rid of the rust on the plaster
Stain removal with shtukaturki- surface laborious process. The main difficulty is that the rust sits deep in the wall. In addition, the probability of the recurrence of unpleasant traces.
If rust has appeared on a small patch of wallpaper, you can solve the problem by means of reposition.
To display the rust stains, you can use the following algorithm:
1) Clean the contaminated section of the wall. For this purpose, suitable, dry cloth. it is not recommended to carry out this work with a damp sponge. This can cause the appearance of mold.
2) Buy a special solution and treat them the wall. It has a disinfecting action.
3) Prime the wall. Wait until the first coat is completely dry.
4) To carry out the experiment. If rust is again formed on the wall, then it is necessary to paint over.
After the above actions "contaminated" area can be wallpapered.
In some cases, you may need to repeat this procedure. Rub rusty spot decontamination facility until it is completely gone.
Thus, this article discussed the main reasons for the formation of rust on the plaster, as well as ways to address them.
