What you need to do first: wall decoration or door trim

In the process of repair work, it is important to comply with their order, because otherwise you can remain unhappy with the result. Very often, people who have planned major repairs in the house have a question that concerns the order of installation of door platbands and finishing materials.

In this case, you can answer unambiguously. If the wall covering is perfectly even, it is better to glue the wallpaper or lay the tiles and only then install the door trim. If the walls are crooked, it is best to install the door frame and level the walls to its level, using plaster and other building materials.

At the same time, it is worth remembering that inattentive work can cause damage to the finishing materials. Therefore, you need to conduct them with extreme caution.

Installation Tricks

As you know, wallpapering involves the complete absence of drafts. This issue can be easily solved by tightly closing the doors in all rooms. However, what if the decision is made to first paste the wallpaper and only then install the door and platbands? In this case, it is worth tightly closing all windows and opening the front door as little as possible.

The consequences of a violation of the sequence of actions

If the door structure and platbands are made of natural wood, which has not been additionally treated with protective components, they can swell due to high humidity in the room. As you know, with closed windows at the time of wallpapering in the room, a critically high humidity indicator is observed. That is why it is recommended to mount the door after facing work.

Door Installation Tips

At the initial stage, it is worth contacting the measurer who will carry out all the necessary calculations and tell the exact dimensions of the future door structure. After this, you need to make sure that the width and height of the doorway remain the same.

After installing the box and hanging the canvas, you must carefully blow out all the gaps with the mounting foam and allow it to dry. In this case, the opening must be strengthened with special struts. They will allow you to fix the door structure and prevent its possible distortion.

It is not recommended to use the door during the drying period of the mounting foam, because any load can cause deformation of the structure.