6 imperfections that spoil the impression of repair

Small imperfections can spoil the impression of repair as a whole. Usually, workers' teams make the same six mistakes, for which not everyone is searched on time.

Wallpaper joints

Two options are possible here: the wallpaper is glued either crookedly and there is a small distance between the joints, or, on the contrary, the wallpaper is lapped. Such a mistake could disrupt the original design of the entire canvas. Wallpaper should be glued strictly joint to joint.

Smudges of paint

The wall is perfectly aligned, plastered and primed. Now the owners decided to start painting, but without following some rules, the wall with a larger the probability in some places will be covered by smudges, which from a distance will stand out for their saturation. To prevent this, a gap of 6 hours should pass between the layers of paint.

Inverted Tile Pattern

On each tile there are special arrows that indicate the direction and orientation of the stack, but not all notice it on time. Everything is fine in the vicinity, but in the distance it turns out that the tile is laid upside down. So, for example, twigs of bamboo in the bathroom will grow down, not up.

Different gender

Do not put the flooring on the curved floor, pre-screeding with special compounds. It often happens that in all rooms the floor is perfectly aligned, but the height is different everywhere. Usually flaws are noticeable after finishing, when it remains only to set thresholds or file interior paintings.

The gap between the window frame and the wall

If all the previous points can be performed independently and with greater responsibility, then the replacement of windows will have to be entrusted to specialized firms. Therefore, it is necessary to carefully monitor the work at all stages, because it is very difficult to close the gaps between the frame and the wall, and often the result is poor and sloppy. In addition, due to cracks in the winter, the apartment will be cold, and the amount for heating will increase.

Curved Outlets

Even such a small detail as sockets becomes a threat to the whole design if they are not installed correctly. It is especially striking when they are mounted at different levels in the same room. Variants are not ruled out when the body of the outlet is screwed crookedly. Also, outlets installed in the wrong place can interfere with the arrangement of furniture.