10 tips from the masters to beautifully stick the wallpaper

In this article you will receive a number of recommendations on how to properly and beautifully glue the wallpaper and find out what nuances should be observed during this work.

1. Measure your room. This must be done in order to find out the dimensions of your room, and in the future to purchase the right amount of building materials to provide the most beautiful and elegant look.
2. Buy in advance all the necessary tools and building materials.
3. Think of your own design that you like.
4. Room preparation. In order to prepare your room, you should remove foreign objects, various furniture, decorations, sockets. It is necessary to turn off the electricity, because you have to work in wet conditions. In the event that you cannot turn off the electricity in your room only, you will have to insulate the ends of the wires and close them with special plugs. If there is no lighting in your room, you can always resort to using an extension cord and a lamp. With the help of a plastic film, you can protect your floor from excessive moisture.
instagram viewer
5. Carefully removing old wallpaper. In no case do not glue the new wallpaper on the old. This can cause a lot of bad consequences. If you decide to take a chance, then most likely a bubble will form, from the interaction of old wallpapers with glue on the water. Another important factor is ventilation. Need to take care of her. This is necessary so that under the wallpaper in the future mold does not form.
6. Remove the paint correctly. The first step is to remove the paint layer. If the surface is too smooth, the wallpaper cannot last long on it. You can remove the paint with a spatula or punch with a special nozzle. Put on a mask before starting work, it will protect your lungs from inhaling dust.
7. Structured wall preparation. Start priming your walls only after removing old wall coverings. This will help to avoid mold and prevent your wallpaper from peeling off. Take the roller and do the work smoothly from the bottom up. Then it remains to wait until the liquid dries, usually it takes about 14 hours.
8. How to properly cut and measure wallpaper. To measure the wallpaper we need ordinary roulette. With it, we can measure the height of the wallpaper and cut off the right amount of material. In order for you to get an even strip, you should fold it in half and start cutting along the bend line.
9. Starting position, from here will be glued wallpaper. The right decision will be to start gluing the wallpaper in a circular motion, alternating each strip after another. Very often, for the starting point of the report - start, take the edge of the window.
10. Proper wallpapering next to batteries. Before you begin, you will need to measure the required number of wallpapers and prepare them for gluing. Then simply attach the wallpaper to the battery, and in the places where it is installed, you will need to make small holes.