Most people prefer laying tiles on their own. However, beginners, making this procedure, make mistakes. They believe that the installation process of tiles is easy to perform. But this is not at all true. After reading today's article, each person will find out what is not recommended when installing tiles on the wall surface.
1) You can not save on the purchase of material. Before buying a tile, you need to make a calculation. This figure should be increased by 15 percent. Indeed, when laying, some tiles can break, get various defects, etc.
2) It is not recommended to lay the tile on an unprepared wall. Before starting work, be sure to align the walls in the room. With a curved wall having many defects, the tile will fall off. And it will happen pretty quickly.
3) Often when laying a tile, its pattern gets confused. This circumstance is due to the fact that initially the wrong laying direction was chosen. Therefore, in rooms it is best to lay the material from top to bottom.
With a bathroom everything is a little more complicated. It's the opposite here. Laying must be carried out from the bottom up. It is best to start the installation of tiles from the middle of the wall. In this case, trimming at the edges will be minimal.
4) Incorrectly applied solution. Many people are surprised that the tile begins to fall off the walls, a few months after its installation. And all because the solution on the tile was applied unevenly. As a result of this, it freezes with lumps, due to which it loses its operational qualities. Therefore, it is necessary to use the entire surface of the tile, and not just its middle. Moreover, the layer thickness should be no more than 15 mm.
5) You can not be irresponsible in choosing tile adhesive. Poor composition does not lead to the most favorable consequences. The tile may crack, fall off the surface of the wall. In this situation, there will be nothing left for a person to do, how to repair again. When buying tile glue, pay attention to its cost. It should not be too low. A small price almost always indicates a poor quality product.
6) Do not apply a lot of glue to the tile. The glue that flows out from under the tile during its installation must be removed immediately. This procedure is carried out with a damp cloth.
Thus, this article presents the main recommendations that are better to listen to when laying tiles on the wall.
-
Why you should not mount a drain from sewer pipes
-
How to eliminate laminate swelling
-
Varieties and benefits of cork wallpaper
-
Is it profitable to use gas heating without a gas pipeline
-
Bathroom Trends
-
What installation errors lead to cracked mounted polycarbonate
-
How to use panels in the interior?
-
Why you can not cover the roof with ondulin immediately on the roofing material
-
Which bathroom tile is considered the most problematic
-
How to nicely integrate floor hangers in an interior
-
Choosing upholstered furniture for the hall: expert advice
-
Which roofing material is the most resistant to damage?
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
