Conduct rough apartment renovation very difficult. It is important to choose the right materials, observe the technology of work. You can turn to specialists who will do everything on a turnkey basis. But the cost of work is quite high. Let us consider in more detail how to competently and accurately level the floor, what needs to be taken into account.
Key Features
If you start repairs in a new house, then most likely you just have a monolithic slab under your feet. You need to put a layer of porcelain. This will help to make the floor not only warm, but also get rid of noise and vibration. The optimum thickness is approximately. If you make it smaller, then you will not get a special effect. It is also important to check the quality of the substrate. There should be no chips, cracks or other damage. This is due to the fact that water will penetrate inside, which negatively affects the quality of your floor. Pay special attention to the risers, because most often the damage is there. In order to remove them, you can use ordinary mounting foam. After you poured expanded clay to the surface, the material is poured with concrete mortar. It is very important that this solution is qualitatively dried. This takes about a day. In order not to fill the expanded clay with concrete, you can initially use expanded clay-cement-sand mixture.
If you level the floor in the bathroom, it is important to pay special attention to protection against moisture. For this, various waterproofing materials are used. Flooring waterproofing is quite conveniently laid, but it is necessary to make a small approach to the walls.
As for the leveling itself, two main materials are used for a private house: a bulk type of floor or a screed based on cement and sand. The first type is quite practical and convenient, while the bulk floor is created very quickly. Using a special tool, the composition is evenly distributed on the floor surface, avoiding cracks and chips in the future.
The use of cement-sand screed is considered more economical and profitable. You can find out in advance what is included in rough apartment renovation and its cost.
The amount of material depends not only on the floor area, but also on the layer that is required for installation. Compared to a bulk floor, creating a perfectly even layer is almost impossible. At the same time, the screed dries for a very long time. This takes almost 1 month. This negatively affects the speed of repairs.
-
The design of the facades of one-story houses, photo examples
-
Led street lights
-
Design features of rectangular rooms
-
How to mask a ventilation pipe
-
Important nuances in choosing a balcony insulation option
-
What type of heated towel rail is not suitable for the bathroom
-
How to choose a desk for a student?
-
Car Battery Charger
-
What is the best way to plant garlic before winter so that only large
-
How to paste an inconspicuous patch on the wallpaper
-
5 reasons why you should not buy cheap ceramic tiles
-
Why is it important to choose the right grit of the sanding belt
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
