Content
- 1 Planning
- 2 Heating
- 3 Engineering systems
Attic was loved by residents of many countries of the world, including ours. To get a beautiful, cozy and comfortable room, it is necessary to take into account certain nuances and take the process of its design as seriously as possible.

With the purpose of the premises located under the roof, they are usually determined at the design stage of the house. They carefully consider the sound and thermal insulation of the attic, choose the right lighting fixtures and plan the necessary engineering systems.

Planning
When a person hears the word “attic”, an image of a cozy and sweet room is formed in his head immediately, in which you can spend your free time pleasantly. Planning is a responsible process that involves thinking through all the details. Only under this condition can you get a functional and practical attic.

In the attic, you can organize a full-fledged children's room, where the child will relax, play with peers and do what he likes. If you equip the attic with engineering systems, then you can make a compact kitchen or a spacious bathroom out of it. In this room you can also organize a cozy corner for women, which every woman dreams of, or a dressing room.

If the roof slopes reach the very floor of the attic, then on this site you can place drawers or shelves. A cabinet can be installed on the opposite, higher side of the room.
Heating
The installation process in the attic of the heating system is approximately the same as in other rooms of the house. No additional procedures are needed here. It is only necessary to consider which system is used to heat the house, and also correctly calculate the necessary parameters.

In the attic you can arrange, for example, fireplace heating. But do not forget that when using the fireplace you will have to regularly perform certain procedures, in particular, to harvest firewood and look after the flooring. It may be necessary to strengthen floors.

Engineering systems
As mentioned above, the attic can be used as a kitchen or bathroom. Such operation of this room is impossible without engineering systems.
The most important for the attic are plumbing and sewage. As a rule, connection to the riser in country houses is carried out without any special problems, since it is displayed on the roof through the attic.

Installation in the attic of such a water supply system, which could provide the necessary pressure, is not particularly difficult. However, in order to accomplish this, a bathroom or kitchen should be located under the attic floor below. This important point should be taken into account at the design stage of the house.

Having completed all the necessary work, you will only have to enjoy delicious food or a foamy bath in the newly made room.

-
Repair of a typical small-sized apartment: whether it is necessary to spend money on the services of a designer
-
What tricks will help to stick wallpaper without folds and bubbles
-
How to make repairs in a new building
-
Why radiator transfer threatens big problems with the heating system
-
What is the danger of installing a rack ceiling with one stringer
-
How builders breed customers for tools and supplies
-
How to remake a communal apartment without breaking the law
-
How to check the quality of plaster to a person far from this issue
-
What repairs should be done in a temporary apartment
-
Why is it unprofitable to repair an apartment for sale
-
10 hidden defects in the decoration of walls and ceilings that are difficult to detect immediately
-
The best way to masonry aerated concrete blocks
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen