Worst Tiles in the Bathroom

At first glance it seems that laying tiles is an easy undertaking. In fact, you need to know at least somehow the basics of geometry, to understand how and where to cut it correctly. Major styling errors that result in poor results.

Buy exactly

Like any consumable, tile is bought with a margin. Firstly, not everyone is able to accurately calculate how much will be needed for laying in the bathroom. Secondly, 10-15% of the tile may be defective or damaged during operation. Upon purchase, it is necessary to open the packaging and check the copies for integrity.

Lay tiles of different sizes

Even tiles from the same batch can vary in size up to a centimeter. At first glance, not many pay attention, but when laying such a tile, any millimeter can play a role. In addition, copies from one package may differ in shade, so the goods are checked in the store.

Laying on poorly prepared surfaces

The surface for laying tiles should be ideally cleaned from the remnants of the previous coating and plaster. Any irregularity in the process of work will not prove to be the best, because the tile in these places will fall off in the first place.

Incorrect installation location

In the bathroom, tile laying works are performed only after leveling the floor and walls, from bottom to top. So that the edged elements are not conspicuous and hidden, it is necessary to think over the laying of rows in advance and start work from the second strip.

Uneven application

Due to poorly mixed adhesive solution, the tile is laid unevenly and may even fall off. To avoid this, the solution is applied slowly and stretched over the surface. Do not work immediately on large areas.

Apply glue only along the edges

In no case can you save on the adhesive solution and apply it at the corners of the tile. With this method of fastening, the tile will crack or crack immediately after the glue hardens. The solution is best applied to the base.

Excess solution

Excessive mortar for tiles after drying out will come out at the seams, forming an unaesthetic picture. Experienced craftsmen remove excess glue while they are wet.

Work without separators

Small plastic crosses when laying tiles help to make the seams even and the same throughout the work area. They also affect the same stacking height. All beginners, without exception, should buy them.