How to easily stick peelable wallpaper

After some time, after the completion of repair work at home, it may happen that the edges of the wallpaper can begin to peel off. With this problem, it is quite possible to deal with yourself, without involving professionals. Next, consider quick and effective ways to glue wallpapers and some points to prevent similar situations in the future.

The main reasons for peeling wallpaper fragments

Carrying out repairs, we try to comply, all instilled and important nuances, so that in the future they will no longer concern these problems for several years. However, after a short period of time, to our surprise, a picture appears with the outgoing edges of the wallpaper. Because of what this can happen, consider the main reasons.

The most common reason is walls with bumps and defects. All these problems must be fixed before the start of the wallpaper gluing process.

Another reason is the rush in preparatory work. Often, people are in a hurry to quickly finish the repair and poorly prepare the work surface for the wallpaper.

In addition, some recommendations must be observed:

• Exclude the presence of drafts in the room when gluing wallpaper;
• Exclude direct sunlight on the wallpaper;
• Dampness and low temperatures negatively affect fresh repairs.

The most effective ways to paste wallpaper

First you need to consider the place of separation. If only the joints of the wallpaper have gone, then the problem can be easily eliminated by coating them with glue that could remain after the repair or you can buy a new small tube of special glue.

When peeling off recently pasted wallpapers together with plaster, it is necessary to carry out a number of simple measures to save the repair. If the peeling of the plaster is minimal, then we need to do the following. Remove the entire problem strip of wallpaper, remove the exfoliated plaster and coat the wall with a damp sponge. Next, take a new roll of wallpaper, coat with adhesive and stick to a prepared place.

The appearance of air bubbles under the wallpaper, after the repair is completed, is also a fairly common problem. There is a very easy and effective way to get rid of them. To do this, we need a medical syringe and some glue. Gently pierce the bubble and release the air. Then, using the same syringe, pour a little glue and wait until the wallpaper softens. It remains only to smooth this place with a rubber roller and dry it well with a hairdryer.