Any person who independently engaged in repair work in the house must have come across a procedure such as staining. And sometimes, even such seemingly easy work can be performed poorly, for example, spots or stains appear on the entire surface. Of course, any person immediately thinks, and maybe they should re-paint the surface, but in most cases it will not do any good, maybe even all the defects will become more noticeable. That is, you need to act very differently.
Why do spots and stains appear on the surface?
There are a lot of subtleties in this work, and everything needs to be taken into account before the start of work, in order to avoid problems in the future. The most common causes of defects are:
- Too thick paint. Viscous composition is evenly distributed over the entire surface is difficult. So it is extremely important to dilute the paint during the application of the base coat. At any bank, they write recommendations for use.
- Slow execution of work. If the painted surface dries quickly, then most likely it will not be possible to quickly roll the border and a strip will appear in that place. It’s best to work without interruption and quickly.
- Roller with a long pile. For a smooth surface it is advisable to use a roller with a short pile, as otherwise irregularities and problems cannot be avoided.
- You can simply not see the defect when applying the layer, if poor lighting or vision problems, then this is a common reason.
- Incorrect application. No need to apply the composition in continuous stripes Stripes may occur at the border.
- Foundation preparation. It is preliminary important to eliminate all surface defects, as their paint will not be able to mask.
How to fix the situation?
The best solution is to sand the entire ceiling until the surface becomes smooth and rough. This is not a dirty job, as only a layer of paint comes off. After that, it is worth preparing the surface and making it smooth and even, it is best to provide high-quality lighting to make sure that there are no problems.
After this, you can safely proceed to the priming, and it is best to use a high-quality composition. It is best to walk through the entire layer a couple of times with a primer. And only after the primer has completely dried, when the ceiling is ready, can paint be applied.
-
The main features of creating a design project
-
How to choose soft wall panels
-
How to correctly calculate the load on the floor slabs of the garage
-
How to damage the stretch ceiling when caring for it
-
How to safely drill a hole in a plastic window
-
How to use the color and texture of gold in the interior
-
How to get rid of white plaque on the tiles in the bathroom
-
How to prepare walls so that the paint does not peel off
-
How to quickly and easily update wooden windows
-
Popular varieties of hydrangea tree
-
Why is it better not to glue the wallpaper with an overlap
-
An easy way to whiten a bath curtain
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
