How not to regret pouring the bulk floor

Filling of a bulk floor is an obligatory process during repair work, allowing you to make the surface perfectly smooth and prepare it for laying floor coverings. When performing work, it is very important to comply with the technology, because otherwise you can get a poor quality result.
Therefore, you need to consider the most popular errors that occur when pouring the bulk floor and methods for their prevention.

Mistake # 1: A Literal Understanding of Self-Leveling Sex Properties

In fact, the prefix “self-leveling” for products such as self-leveling floors is a marketing move that manufacturers have successfully used to attract customers.

Mistake number 2: non-observance of proportions when mixing the solution

Many people imagine bulk flooring as a substance that spreads like liquid sour cream. Therefore, when kneading, they can cease to comply with the proportions and add more liquid to the solution. Inconsistency of the proportions of water and dry matter with the norms indicated by the manufacturer on the packaging is a gross error.

Thus poured in such a bulk floor loses strength indicators, which leads to delamination of the coating from the base, the formation of depressions and cracks.

Mistake No. 3: neglect of the dust removal and priming procedure

Self-leveling floor is used as a finishing method, allowing to make the finishing surface perfectly smooth. Therefore, its thickness varies within 3-5 mm. If you ignore the need to clean the dried coating from dust and its subsequent priming, it does not able to withstand pressure or withstand mechanical damage, peel off from the screed and cover cracks.

When can you not use the bulk floor?

You can refuse to fill the bulk floor if the surface is subsequently covered with porcelain stoneware or ceramic tiles. These materials are laid on a special tile adhesive, the layer thickness of which is approximately 3 mm. Due to the height of the adhesive, small differences on the finished surface can be compensated for without the use of additional leveling methods.

In order not to regret pouring the bulk floor, it is also worth carefully approaching the procedure for mixing the solution. Kneading should take place at low speeds, which will minimize the amount of air entering it and causing the appearance of bubbles on a dried surface.