What fittings can not be used for the foundation of a one-story house

At the initial stage of construction work on the construction of a one-story residential building, special attention should be paid to the foundation. Indeed, it is precisely from its technical characteristics that the strength, reliability and durability of the entire structure will depend.

In the construction of private houses, the most commonly used type of foundation is tape. The main material for its manufacture is concrete. Many people often ask themselves the question of whether it is necessary to reinforce the concrete foundation and what kind of reinforcement should be used?

Why reinforce the strip foundation?

Despite its strength, concrete does not have the proper level of resistance to tearing. Therefore, the concrete foundation must be additionally reinforced, which will protect it from cracking and the appearance of deformations.

The reinforcement is laid in the lower and upper parts of the future foundation and holds it in one position, regardless of the influence of external factors. In addition, experts recommend installing vertical reinforcement, which will achieve high strength indicators of the concrete base.

Which reinforcement is suitable for the foundation?

Corrugated steel bars made by hot rolling are suitable for reinforcing a concrete strip foundation. Due to the fact that their surface has recesses, they have a good level of adhesion to concrete. As for the vertical additional reinforcement, steel rods with a smooth surface can play its role.

The choice of the diameter of the main reinforcement directly depends on the features of the future building structure and the estimated load on the foundation. For single-story buildings, you can choose steel rods with a diameter of 10-14 mm, for heavier structures - up to 22 mm.

Reinforcing profiles made of fiberglass deserve special attention. This material recently appeared on the construction market, but managed to gain well-deserved popularity. Its main distinguishing feature is its strength, which is in no way inferior to that of steel reinforcement and low weight, which greatly simplifies the process of work.

What kind of fittings can not be used for the foundation of the house?

It is strictly forbidden to use steel or fiberglass rods with a smooth surface as the main reinforcement. They will not be able to provide the concrete structure of the strip foundation with a sufficient level of tensile strength.