Is it easy to renew the seam between the tiles in the bathroom

A tile may look old and untidy only because the seams between the tiles are frayed or fallen off. In order not to start a large-scale repair, you can update the tile joints.

Preparatory work

To begin with, the bathroom is freed from hinged furniture, stools, cabinets, hooks and all things. The surfaces of the floor and walls must be clean. If necessary, the toilet sink is removed. To work, you need protective gloves and glasses.

Stitch painting

The fastest way to renew the joints between tiles is to whitewash or paint them, but you should not count on a long-term effect. The paint will begin to pee after six months.

You can also restore the seams by layering a new grout on the old. But there are limitations: the procedure is performed if the depth of the seams is more than 2 mm.

You can use special paint to restore the color of the seams, which is sold in construction departments. It is worth using such materials after preliminary mechanical cleaning of the seams from dirt, fungus, mold, limescale. After applying the paint, wait about 10 minutes and clean the tile with a damp cloth.

Grout replacement

A more durable and correct option for working with restoration of joints is a complete replacement of grout. With the help of the extender, the old layer is removed, any sharp and narrow object that will not be harmful to the integrity of the tile is suitable. Grout is removed without much effort, so the risk of damage is minimal.

If complex cement compositions were used as grout that could not be removed “dry”, then an acid cleaner should be used. He soaks old seams, it becomes easy to clean them. In this case, the product does not harm the tile.

The finished cleaned surface must be thoroughly vacuumed, then wash all the seams with soapy water, wait a day until it completely dries and treat the surface with a penetrating primer.

Applying a new grout

For work, you need a rubber spatula, grout grout and several hours. In the process of movement should be fast and accurate, as the mortar for joints quickly sets. It is necessary to well lubricate all the recesses, reaching the wall.

After filling the seams, you need to draw them beautifully. For this, a special tool with a semicircular tip is taken. In the process, the tool should touch the edges of two adjacent tiles. After all the procedures, you must wait until the grout dries out a bit and begin to wipe the tile with a damp sponge or rags.