LED wallpaper: how to stick a fashionable novelty

A couple of decades ago, it seemed that vinyl wallpaper was the limit of innovative technology in terms of pasting walls. The words "ZD" and "wallpaper" combined no better than "air conditioning" and "suitcase" ...

The whole universe in one bedroom

Now it’s hard to surprise the consumer with voluminous paintings, a myriad of colors and shimmering light on the walls. Only grandmothers who were sitting at the blue screens, even LCD TVs, would be amazed. 3-D wallpapers have already ceased to look so inconceivably futuristic. The cost also took quite acceptable values.

But technology, evolving with the speed of expansion of the Universe, already carries another know-how. With LED technology 3D wallpapers get the opportunity to change the image. The user can set the tone, color, panorama as desired.

The new material is the thinnest insulated conductors with built-in micro-LEDs. Moreover, the wallpaper is as flexible and flexible as their paper ancestors. But what can be compared in value if every day crossing the threshold of an apartment you can literally make a spacewalk.

Consumer creator

With a minimum of creativity and imagination, anyone can create a whole world at home. The choice of vinyl abstraction for walls for a couple of years is a thing of the past. Glue the walls only once.

The pasting technology itself has not yet advanced that far. Basic operations remained unchanged: Wall, joints, corners should be absolutely even, cleaned of extraneous debris. If necessary, the walls will have to be repacked. The slightest roughness can ruin the fullness of the effect; The joints of the photo wallpaper itself need to get perfect. The slightest discrepancy will not allow to combine parts of the image into a single whole. It is recommended to carefully check everything before applying glue; In addition, devices can be used for docking in the form of a plumb line and level. Or connect the stripes in the corners of the walls, if possible. They will help to level out possible errors; In order not to damage expensive luxury, glue should be put only on the wall. The amount of glue should be as low as possible. The aluminum base does not absorb the excess and there will remain mounds; The glue should dry longer than usual for the same reason as insulation by the substrate. The microclimate in the room should be in the range from 18 to 25 degrees.

Two days of waiting and... forward to the daily world of dreams and fantasies!