After painting the walls, often unpleasant stains appear that completely spoil the appearance of the wall and destroy all the work done. Faced with this problem, people often try to paint the wall again, believing that a new coat of paint will hide the resulting imperfections. However, this will not solve the problem at all, because the streaks will increase in number and become only more noticeable. It is advisable not to allow them to appear even during painting.
Reasons for the appearance of divorces
In order to prevent leaks when painting the walls, it is necessary to observe some rules and avoid the following factors:
- The thicker the paint, the more difficult it is for it to qualitatively paint the surface. Before starting work, it is necessary to dilute the paint in water, if it is water-based, or solvent, if the paint is based on oil. This especially affects the very first layer.
- It is necessary to apply paint to the surface with quick movements, without stopping. Otherwise, previously painted areas will dry faster than new ones, which will necessarily lead to the appearance of streaks when applying the second layer. [list] [list] For painting work it is best to use a roller with a short with a pile. The roller having a long pile will leave only a lot of streaks after itself.
- The room in which the painting takes place should be well lit. Often the problem of divorces appears due to insufficient light or poor vision of the painter.
What to do if streaks have already appeared?
When there are stains, the problem area should be cleaned from paint with a small piece of sandpaper. This should be done carefully, because there is a danger together with the paint to remove the putty. After that, grind the cleaned area until it is leveled and wipe it with a damp cloth.
Then the wall must be primed, first applying a primer in one coat, and after an hour - a second. After performing these steps, you need to re-paint the problem area, applying the tips described above.
As you can see, solving the problem of drips on the walls is quite simple, if you know what to do. You just need a small amount of primer and a little time. However, it would be much more correct to simply prevent the appearance of such a problem. Use the painting tips given above, and the appearance of unpleasant streaks that spoil the appearance of the wall will bypass you.
-
Drywall Preparation: Cutting, Processing
-
Swedish style in the interior
-
How to choose curtains?
-
Scenic folk patterns in the interior
-
Low-quality stretch ceilings - why should you refuse to buy?
-
Roman curtains - what is it, their advantages and disadvantages
-
Why knowledgeable people choose linoleum
-
What's bad new, cordless screwdriver
-
What to do if smoke from the stove goes to the house
-
Choose a carpet: type of material, its features and photo
-
What material can you quickly build a house from
-
How to style the wall behind the head of the bed
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
