Wallpaper must be glued to the joint. Only in this way you can update the room, make it more stylish and neat. Not all people know how to properly glue paper canvases on the walls, and therefore the quality of the result may not please.

In order to gently paste the wallpaper on the walls, you should carefully prepare. To do this, collect the necessary tools:
- Glue, the composition of which is suitable in its qualities for a particular type of wallpaper;
- Capacity for its kneading;
- Scissors, stationery knife, ruler;
- Spatulas (metal and plastic);
- Brushes for applying glue to the surface of paper webs.
It is worth remembering that after gluing the wallpaper to the walls, they need to be leveled to get rid of bumps or air bubbles. To do this, it is recommended to use a piece of rags.

To paste the wallpaper end-to-end and not get spaces between the paintings, you need to measure their width and make appropriate markings on the walls. As a starting point, it is desirable to choose a door or window opening. They have clear edges that you can focus on when creating markup.

In the process of performing work, it is important to use a suitable length ruler. To be sure of a positive result, you can use the level.
Wallpaper Cutting
Paper sheets should be laid on the floor and measured. After applying the marking, you can proceed to their section using sharp scissors or a clerical knife. You need to measure the segments, given the need for stock and combination of drawings.

Sticking process
In order for the wallpaper to be glued to the joint, and the drawings do not move, the following paintings must be glued, focusing on the edge of the previous ones. Joints need to be carefully smoothed out using rags, squeezing air and smoothing one canvas to another.

We should also say about pasting corners. No need to try to connect two adjacent walls to one wall of wallpaper. In this case, the canvases can “lead”, which will spoil the overall result and lead to the need to redo the repair in the room.
The canvas needs to be glued to the wall with a small approach to the adjacent one. Approach width should be about 1-2 cm. It is on him that the wallpaper on the next wall will be lapped.
All the rules set forth are simple, and following them will allow you to achieve perfectly smooth and ennobled walls that will become an adornment of any room.
-
What you need to know when designing a half-timbered house
-
The better to close the gaps between the walls and the ceiling in a wooden house
-
Attic floor insulation
-
The consequences of errors when knitting reinforcing bars
-
Why it is impossible to mount tongue-and-groove plates without elastic laying
-
Why you can not immediately walk on the laminate after laying
-
What is the difficulty of installing roof sandwich panels
-
Condensation on the sandwich panels due to installation errors
-
Is it possible to build a house alone
-
Typical errors when installing wall panels
-
Wooden carport: pros and cons
-
What causes a violation of the temperature regime when laying brick
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen