How to make repairs in the bathroom without errors: 5 subtleties that are important to consider

During the repair in the bathroom, it is very important to take into account all the nuances and subtleties, because often a number of unforeseen problems arise. In the future, it will be quite difficult to fix everything, therefore, even at the stage of preparation for the repair, it is necessary to draw up a plan of all the points that not one was missed. Indeed, in the end, often even the slightest mistake becomes the cause of new repairs and high costs.

5 main mistakes when repairing a bathroom

Incorrectly installed drain

When repairing in the bathroom, often you have to completely change the location of the plumbing, so it is always necessary to take into account the effectiveness of the system. For example, do not move the toilet farther than 2 meters from the general sewage system - otherwise, a strong rise of the floor axis may be necessary. But for the drain to work like a clock, you need to have a slope of at least 4 degrees.

Improper waterproofing installation

In standard multi-storey buildings, the so-called sanitary cabin is often found. The main purpose of which is to prevent flooding. Therefore, during dismantling, this point must be taken into account.

In addition, waterproofing of neighboring rooms is needed, but if the total area of ​​the bathroom was increased during the redevelopment.

Faucet in front of a flexible liner of a washing machine

Modern washing machines are connected directly to utility networks. To ensure safety at the junction of the pipe and the flexible connection, an overhead tap is required.

Before the repair, the redevelopment was not agreed

Redevelopment of the bathroom requires a number of certain conditions. For example, a bathroom should not go beyond the total area of ​​a room or kitchen. Redevelopment is possible only by expanding the non-residential part of the house, such as a corridor or storage room. Since when moving to the living area it will be impossible to officially register the new bathroom area.

Big savings on pipes

In most cases, when replacing plumbing, they use polypropylene pipes, they are quite reliable and are relatively inexpensive. In this case, it is best to put reinforced pipes made of polypropylene. If you save and buy standard ones, then in such a situation the risk of leaks increases due to the difference in high temperatures.