Top 5 mistakes when building a house from profiled timber

In modern individual construction, profiled timber is often used as the main material. Relatively low cost, short construction time, low weight of the structure, attractive appearance, good heat - soundproofing properties, simplicity and cost-effectiveness of decoration are far from all the advantages of houses from this affordable building material.

If you avoid the typical mistakes when building a house from a profiled beam, then it will last a long time and will not require significant investment in operation. The most common mistakes in the construction of such structures are described below.

Neglecting the initial moisture content of the material

Experienced builders are aware of the importance of using a winter forest, which has all the necessary characteristics for building houses from profiled timber. The use of natural moisture material involves waiting a certain time before finishing, which lasts about a year. During this period, the shrinkage of the house is up to 4 cm. Even use with artificially lowered humidity in a special furnace does not guarantee the absence of shrinkage. But in this case, it is only 2 cm, which allows you to build "turnkey" without waiting for time to shrink.

Neglecting shrinkage during construction

It must be remembered that the erected house will undergo shrinkage in the near future. To minimize its consequences during construction, shrinkage gaps should be left. Calculations of builders show that it is 3% of the total length of the part. Failure to comply with this rule in the future will affect both the appearance of the house and its operational characteristics.

Neglecting sliding bearings

The drying of the tree occurs unevenly. As a result, the shrinkage of different designs is different. To avoid skewing the roof, experienced builders use sliding supports that allow it to adapt to the changed geometry of the structures. If you neglect this factor, cracks will inevitably appear, which will affect the heat - moisture protection characteristics of the house.

Careless laying

In the pursuit of labor productivity, many unscrupulous builders work in an emergency mode, neglecting well-known rules. Before fastening the bars with a nagle, it is necessary to press them together with straps. This will avoid the appearance of cracks, cracks and save on caulking after completion of construction.

Disregard for the installation of doors and windows

The use of polyurethane foam as a heater of wooden structures at the construction stage is unacceptable. Wood and foam have different shrinkage compensation ratios. As a result of its use, deformation of door and window structures is inevitable. Therefore, experienced builders use casing.

To properly build a house from a profiled beam, you need to have certain experience and construction skills. With a professional approach to construction, you can avoid the listed and other possible errors that will be difficult and expensive to eliminate.