Where the money is buried: 5 typical mistakes when repairing a bathroom

Carrying out repairs in the bathroom requires a special approach, because this is the only way to achieve your goals and avoid additional financial expenses. There are the most common mistakes that often lead to the need for repeated repairs.

Mistake # 1: installing a plasterboard ceiling

Use this material in the process of arranging a bathroom is possible only if careful ventilation is provided. For this, a system of forced ventilation of air and moisture absorption must be installed in it.

A good option will be the installation of a stretch ceiling, which does not absorb moisture and does not require special care. To maintain an attractive appearance, it is sufficient to regularly wipe this design with a damp sponge. In this case, it will not cause any stains or other technical and visual defects.

Mistake # 2: Floor Level Mismatch

It is important to remember that the level of the floor surface in the bathroom should be lower than the floor in other rooms. Thanks to this, it will be possible to avoid flooding of the house in case of a sudden break in the pipeline or other communications.

If it is not possible to lower the floor level, it is worth considering the presence of a threshold, the height of which should vary within 8 cm. It will also not be superfluous to foresee the presence of a special drain connected to the sewer system near the threshold. It will allow you to divert the maximum amount of water from the premises in case of flooding.

Mistake number 3: the wrong choice of material for flooring

When choosing a ceramic tile, it is worth remembering that on a glossy wet surface you can easily slip. It may also not withstand mechanical damage or vibration resulting from a working washing machine.

The best option is not to save, but to immediately veneer the floor with granite.

Mistake # 4: lack of reinforcements for an acrylic bath

Modern acrylic bathtubs can not withstand heavy loads and crack. Therefore, it is important to equip the reinforcement at the initial stage of installation. It can be made of a durable galvanized steel frame with the addition of plastic or ceramic tiles.

In this case, it is worthwhile to provide for the presence of a special hatch in the box, providing access to the pipes for repair.

Error No. 5: incorrect connection of a warm floor

When designing a floor heating system, it is important to remember that its main elements should be 10-20 cm away from furniture and appliances. Constant exposure to heat can damage the parts of the washing machine and cause cracking of furniture sets made of wood and chipboard.