Why glued PVC tiles do not stick to walls and ceilings

The process of laying PVC tiles can hardly be called simple. To perform this procedure, you need to take into account all the subtleties and nuances that may arise during operation. Often the tile refuses to stick to the walls and ceiling. This circumstance has several reasons. In today's article, the most common ones will be considered.

1) Wrong adhesive selected. The issue of choosing glue for tiles should be approached with a special responsibility. The life of the tile, its operational qualities, depend on the selected composition. Some people, coming to the store, buy the cheapest glue, believing that all formulations are exactly the same in terms of characteristics. However, this is not at all true. For PVC tiles, special glue is needed, which has a number of distinctive features. And it is not surprising that the tile falls off the walls a few days after installation.

2) Non-compliance with the rules for drying glue. After the installation of the tiles is completed, the windows in the apartment are not recommended to open at least a couple of days. With the windows open, the humidity in the room with the tile increases sharply, which leads to its arbitrary dismantling. In a few days, the glue will have time to completely dry, and then you can safely open the window.

3) Wrongly applied glue on the surface of the PVC tile also contributes to its peeling from the walls or ceiling. In the process of applying glue, some rules must be observed. The composition should be evenly distributed over the entire surface of the tile. Putting glue only in the center is not a good idea. Yes, it may tile and sag on the wall for several years. But in a year she is guaranteed to come in an inappropriate form. The surface of the wall must also be coated with glue. Moreover, according to the recommendations of many experts, the layer thickness should be at least 15 mm.

4) It is better not to install PVC tiles in rooms with high humidity. Firstly, it will greatly complicate the whole process of work. And secondly, it will lead to peeling tiles from the walls and ceiling. After all, the adhesive will lose its performance under the influence of moisture.

5) If mistakes were made during the laying process, the tile most likely will not last long in its place. The installation of PVC tiles should be carried out using the building level. Excess glue must also be removed with a rag. There are still a large number of subtleties to which you need to pay attention.

This article examined the main reasons why PVC tiles do not stick to the wall or ceiling.