Mistakes in the repair of housing is a common phenomenon, especially if it is done with one's own hands. Over time, flaws surface, and the owner of the house can go broke for a tidy sum.
Typical Repair Failures
Who is warned is armed! If you pay attention to some nuances, fatal errors can be avoided:
- Do not rush, especially when it comes to overhaul. For example, a cement screed should dry for at least 16 days (ideally 45);
- The problem of laying television and Internet cables should be taken care of BEFORE the start of finishing work, otherwise the wires will be stretched throughout the apartment, which will give it a sloppy look;
- Take care in advance of the location of sockets and switches. It is best to prepare a detailed layout of furniture and appliances;
- It is worth installing an additional hood in the bathroom, this will help to avoid excessive humidity, the appearance of mold and fungus;
- You can remain with quite material damage (and not only yours) if you do not pay attention to the material of water pipes and heating radiators. For your own home and multi-unit housing - different materials, as there is a noticeable difference in the magnitude of the pressure. Otherwise, the flood cannot be avoided already at the first start of heating or when connecting the washing machine;
- Often in new homes you can see frozen windows not only outside but also inside. At the same time, the room feels low temperature and damp. In this case, the problem may be in the windows, but if it does not disappear even after replacing them, check the correct location of the heating devices. Insufficient heat from the radiator over a large area leads to residents being uncomfortable;
- It is better to entrust the installation of plumbing, windows, doors to a team of specialists, otherwise there will be no troubles in the future. Plumbing may leak, the windows may freeze, and the door just won’t close because you calculated it wrong dimensions or in the room a lot of humidity, which makes the use of doors from the forest unacceptable (will swell).
For the repair of any complexity, the saying “Measure seven times - cut one” is always relevant. Just try to calculate everything to the smallest detail and do not hesitate to contact the professionals for help!
-
Methods for laying moisture-proof plywood
-
How to make plasticizers for concrete from improvised means
-
Which floor tile adhesive is best suited
-
How to correctly calculate the load on the floor slabs of the garage
-
The consequences of errors when knitting reinforcing bars
-
The most interesting wall solutions in the living room
-
How to mosaic the floor and not regret it
-
What is the difficulty of cutting corrugated with relief
-
What mounting errors will spoil even the best polycarbonate
-
How to remove bubbles on pasted wallpapers
-
How can I install a pile-screw foundation under an old house
-
Why should a house made of timber be built in winter
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
