Why did the wallpaper split at the junction and how to fix it

Before starting the repair, we involuntarily begin to reflect on how the room will look after its completion. At this moment, we are overwhelmed by the most pleasant feelings, but the repair, in fact, is a very nervous occupation, during which the most unforeseen and annoying cases may arise. For example, the most common problem is that after sticking, the wallpaper may disperse at the junction, which will thoroughly upset you and create a very unsightly look. In order to prevent this from happening, you need to follow some rules that will help to avoid such a problem, as well as find out several main reasons for its occurrence.

Reason # 1

All paper wallpapers tend to swell from moisture, which can subsequently lead to their dispersal. For this reason, it is worth not soaking them very much and sticking immediately after the glue is distributed, without giving too much time for swelling.

Reason number 2

This reason is connected with the first one and that if you go too far with glue, then there is a high probability that the wallpaper will be the first to grab, and then the glue, which will ultimately lead to the consumption of seams.

Reason # 3

Wallpaper can also be defective and unevenly cut obliquely at the edges. For this reason, you should carefully examine each roll of purchased products in the store to avoid various kinds of surprises.

But, if you still have dispersed the wallpaper, then do not worry too much, as there are several ways to fix this nuisance:

1. Re-glue the wallpaper. Perhaps this will seem very cruel, but if the wallpaper has dispersed quite thoroughly, then you will have no choice but to re-paste them again.
2. You can also simply paint over them with special felt-tip pens.
3. It is possible to putty the joints with wallpaper chips mixed with glue.
4. You can install special panels that will hide the trouble of repair and create an unusual and fashionable style for the interior.
5. You can still show imagination and choose a beautiful border for wallpaper, which will be combined in color and hide the joints.

In addition, experts advise gluing vinyl wallpapers to avoid joints and after the end of gluing make sure that there are no bubbles and joints. If they show up, then it is better to correct them in advance.