The issue of laying hidden electrical wiring must be decided at the planning stage. This will allow to foresee all possible problems in the future process of repair or construction. In addition, conducting hidden wiring is not possible at every stage.
Speaking about ways to achieve the goal, I would immediately like to note that the diagonal placement is not correct. Any electrical wiring must be laid strictly vertical-horizontal method. This is important in order to avoid damage to the cable or personal injury from electric shock during work.
As for the methods of disguise, they are of two types: internal and external. The first method includes such stages of work as:
- Markup;
- Strobing;
- Wire fastening;
- Sealing the strob.
When implementing an internal masking of wires, plaster is used.
External hiding involves the use of special skirting boards and baskets, in the case of the ceiling, wires can hide behind suspended structures.
It is always important to remember that wires should not come into contact with finishing materials. First, when deciding on a choice, it makes sense to give preference to models that correspond to the calculated load level. It will not be superfluous for these indicators to be taken with a margin. This will eliminate the possibility of overheating.
Secondly, all wiring must be carefully insulated. For this purpose, various polymer electrotechnical tubes, cable channels or systems of electrotechnical baseboards are often used. The use of such materials will not only allow you to hide and organize the electric wires, but also provide a distance from the facing material. In addition, a variety of colors contributes to the choice of protective material that will fit as much as possible into the interior.
It is very important to make sure that the type of insulation used is fireproof and not fake. In order to be sure of this, it is best to ask the seller for a safety data sheet or a safety data sheet for the product.
Previously, the process of hiding the wires was quite acute. Its overheating or short circuiting in conjunction with a fire hazardous material often caused a fire.
Modern protective components allow you to mount wiring even in houses built of wood. The main thing is to make sure that the purchased products are not fakes.
-
How to check the quality of work so as not to miss out on defects in finishing
-
Frame walls: construction method
-
How to mosaic the floor and not regret it
-
What to do if walls crumble
-
What is the difficulty of cutting corrugated with relief
-
How to make "fur coat" plaster without a special tool
-
What you need to know about rack ceiling components before buying
-
Is it possible to dismantle tiles with my bare hands
-
How to make marble floor cheap from concrete
-
What are the most difficult to install sandwich panel elements
-
How to equip wall drainage for a private house
-
How to fix uneven brickwork
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
