Hidden wiring is becoming more and more popular, many people want to hide wires if possible, for a more aesthetic appearance of the premises. If you lay the wires yourself, you need to consider the cost of the tool for gating and labor costs, you also need to take into account the complexity of the routes and the size of the apartment.
Earlier, grooves for wires were made simply - with the help of a chisel and a hammer. You can’t imagine cheaper, however, even with experience, it’s almost impossible to do it gently, with even edges. Moreover, such a method will take a lot of time and effort. Therefore, if the area of the room is large, it is better to resort to more modern methods.
If the farm has a hammer drill, the task will be solved quite quickly. The weak side of the method is the uneven edges of the strobe, which, as a rule, is not significant. In addition to the device, 2 drills of different sizes and a shovel will be needed. First, you need to mark holes to drill 2.5 cm deep with an indent of 1 or 1.5 cm, then walk with a spatula. The main thing is not to put it across the strobes, so as not to crush an extra piece of the wall.
The owners of the grinder know how many tasks she can solve. It is enough to buy a diamond disk on it and enjoy the smooth cuts. It is important to stock up with a good respirator for protection against dust and to attract a partner who, with a construction vacuum cleaner, will try to minimize the pollution of the room with dust. First you need to cut through the edges of the strob, deepen them with a puncher or a chisel.
Perhaps it would come to someone's mind to solve the problem professionally - to get a chipper. He is an advanced grinder. Two discs with an adjustable distance between them, a powerful casing that isolates the cutting space and a special outlet for the vacuum cleaner. As a result - perfectly even strokes without dust, in the minus a purse that is pretty thinner, because the tool is too expensive for one time.
In order not to break firewood, it is necessary to take into account security restrictions with any method. Reinforced concrete walls cannot be cut, however, if you cannot do without it, the depth of the grooves should be small and the fittings should remain intact. The internal load-bearing walls are forbidden to be ditched without special permission of the municipal authorities. On the ground floor it is better to refuse such an undertaking altogether. The grooves must be strictly vertical or horizontal.
-
How not to regret pouring the bulk floor
-
Masonry sequence: why it is important not to break
-
How to check the quality of plaster to a person far from this issue
-
On which coating can not be laid laminate
-
How builders breed customers for tools and supplies
-
Where the money is buried: 5 typical mistakes when repairing a bathroom
-
Methods for laying moisture-proof plywood
-
How to calculate the repair time in order to catch an important event
-
Methods for laying laminate on an uneven base
-
The technology of facade insulation with foam
-
Why can't you make a dressing room small
-
Because of what errors, the skirting board often falls off
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
