Than it is impossible to wash off liquid glass from a ceramic surface

Stains formed after using liquid glass spoil the appearance of ceramic tiles. Such a problem may be encountered by people who started repairing the apartment and were inept at handling facing materials and adhesive mixtures.

Removing liquid glass from the surface of ceramic tiles is very difficult. It is important to start acting at the initial stage of the composition getting on the tile, because after it dries, and it dries very quickly, it will be difficult to do this.
It is worth remembering that some substances not only dissolve liquid glass, but can also adversely affect the structure of ceramic tiles.

How to safely remove liquid glass from a tile?

To remove the frozen liquid glass, it is enough to use the products that are found in every home.
It:

• Old toothbrush;
• Rag;
• Blade;
• Vinegar;
• Foam sponge;
• Gloves to protect hands from acid;
• Spray gun.

It is important to pay attention that it is necessary to use table vinegar, and not vinegar essence. If there is no vinegar in the house, you can independently prepare a solution using ordinary citric acid.

At the initial stage, contamination should be moistened and the substance softened. After half an hour, it’s worth trying to clean the surface of the tile with an old toothbrush. If contamination is not removed, you can carefully cut it with a blade or clerical knife, being careful not to damage the ceramic surface.

You can try to remove small traces of dried liquid glass with fine-grained emery paper. In this case, it is necessary to carry out manipulations very carefully so as not to damage the ceramic coating.

It is also noteworthy that it is much easier to remove dirt from glossy tiles than from a matte or textured surface.

How can liquid glass be removed from ceramics?

Some products are categorically not suitable for the processing of ceramic tiles. These substances include hydrofluoric acid, which negatively affects the structure of the material and destroys it. Also, do not use abrasive products that can damage the coating of the material and leave deep scratches on it.

Any of the above permitted actions are guaranteed to give a positive result. Moreover, the sooner pollution is noticed, the less time will be required to remove it.