Repair is a very troublesome business. Everyone wants to simplify it in one way or another. This can be done, because there are simple and generally available methods that greatly simplify life. During the repair, little things can help, which at first glance may seem insignificant. However, a large number of problems in the future thanks to them pass by.

The first item you can pay attention to is an extension cord. During the repair, the wires are often confused, causing irritation and slowing down the work. To avoid this, you can take a bar that is larger than the extension cord in size, remove it from the last screw and attach the case to the bar. Places for screws must be marked with a screwdriver or pencil. Then you should drill holes in two opposite places. The first part of the extension cord is fixed with screws, the second - with screws on the other side. Two metal plates are also screwed on the back side. The wire for the extension cord is then wound easily and simply.

Tool storage is another problem that may arise during repairs. For them it is worth equipping a convenient place. To do this, you need a board from an old cabinet or something similar. Clips made of plastic for pipes or oars should be screwed onto this board. Afterwards, it will be possible to suspend instruments on them so that they are always in sight and not lost anywhere.

The third useful life hack is a mini drill. With this tool you can cut, polish, drill and perform other operations. Circles for cutting will help to make special circles. Alas, during the operation of the mini drill, sparks can fly in all directions, chips are sprinkled on the floor. Protection made from a plastic bottle will help to avoid this. You will need to make a hole in the bottle and screw it to the tool. To a drill on a cover further twist a bottle. Chips and sparks will no longer be a concern during cutting.

Another useful tool is brush replacement. You can remove the stubble and paint stained bristles, leaving only one handle. The paper clip is then fixed to it with a screw. You can insert a sponge into it and use the updated "brush".

Last life hack - use standard sizes in your layout. The interior in this case will be cheaper, because you do not have to order separately equipment, furniture and other items. On the network you can find online planners with which you can make a similar standard project.





-
Repair of a typical small-sized apartment: whether it is necessary to spend money on the services of a designer
-
What tricks will help to stick wallpaper without folds and bubbles
-
How to make repairs in a new building
-
Why radiator transfer threatens big problems with the heating system
-
What is the danger of installing a rack ceiling with one stringer
-
How builders breed customers for tools and supplies
-
How to remake a communal apartment without breaking the law
-
How to check the quality of plaster to a person far from this issue
-
What repairs should be done in a temporary apartment
-
Why is it unprofitable to repair an apartment for sale
-
10 hidden defects in the decoration of walls and ceilings that are difficult to detect immediately
-
The best way to masonry aerated concrete blocks
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen