For complete comfort, the house needs hot water. But in our realities, not in all settlements there is the possibility of connecting to the city's hot water supply. And in this situation, the purchase of a boiler will be very relevant. But again the question arises, how and where is the best place for this device.
First, you need to determine the shape of the water heater. They have a completely diverse shape and design. Oval, square, round, rectangular and the like. Therefore, when choosing the installation location, the characteristics of the boiler should be taken into account.
Choosing an installation location
A particularly important point when installing the boiler is the correct selection of the location. It is worthwhile to be based not only from a technically advantageous point of view, but also pay attention to the aesthetic side of the issue. When choosing a place, you should adhere to the following recommendations:
- The boiler must not be exposed to low temperatures, that is, its location must necessarily be indoors;
- Ideal would be the location of the boiler, as close as possible to the point of entry of water into the device;
- For the convenience of connecting the boiler to the water supply system, its location should be in close proximity to the pipes of hot and cold water;
- Do not hide the boiler in a niche or sew up it with a plasterboard box. So you significantly limit the ability to maintain the device;
- The boiler must be installed exclusively on the load-bearing wall.
It is worth noting that the boiler in its full form can weigh a lot, about 100 kg. Therefore, its installation should be carried out on a wall capable of supporting a given weight.
If you have a fairly large family, then the best option would be to purchase a boiler for 200 - 300 liters. Its placement is recommended on the floor. Moreover, this will not necessarily be a bathroom, the boiler can be installed in the kitchen, in the boiler room and in other premises convenient for you.
Remember that the best option is to place the boiler at a height. That is, to create additional water pressure in the system, the device is best placed under the ceiling space.
-
What boards can not be used for half-timbered
-
Why does the grinder work, but the disk does not spin
-
Features of the installation of half-timbered columns
-
How to make a rectangular cutout in ceramic tiles
-
How to restore knife marks on a countertop
-
What mistakes are made when the radiator is connected diagonally?
-
When an adjustable floor is more profitable than a capital screed
-
What primers are not suitable for application under fiberboard
-
What installation errors lead to the leakage of the polycarbonate canopy
-
When you need to install heating radiators not under the window
-
How to paint from spray can without smudges
-
How to cut glued tiles on a wall
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
