We decided to do the repair yourself and think what tools will help you save on construction equipment. It all depends on the planned work and the monetary funds included in the estimate for the instrument. Well, first things first.
Interior decoration
If you plan the interior decoration of the house, where the work will be done on plastering walls and ceilings, wallpapering and painting the ceiling. Laying laminate and tile on the floor. In this case, you will need to stock up with this tool:
- Putty knife for mortar;
- A plaster rule for leveling walls;
- Bucket for plaster, glue;
- Roller for priming and painting;
- Brush for eyeliner along the perimeter of the walls;
- Tray for rolling paint;
- Construction level for measuring the verticality of the walls;
- Pencil and tape measure for marking and measuring length;
- Manual tile cutter or glass cutter, if there is a grinder, then you will need to purchase a diamond wheel for tile and granite;
- Electric jigsaw or hand saw for a laminate;
- A spatula for wallpaper or a roller, you can disperse the bubbles with a rag in the old way;
- Scissors or a construction knife for cutting wallpaper;
- Mixer or drill with a whisk for kneading tile glue.
These tools can be dispensed with the repair stated above.
Facing siding
We planned to sheathe the facade of the building with siding, then you need to decide on the frame, wood or metal profile. It is difficult to work with plastic in the winter, but you can only carefully, without bending the plastic panels. What is required for wall siding:
- Jigsaw - sawing wooden blocks for the frame. They can also cut siding with a small nail file, but not in winter. Plastic may crumble from cold;
- Grinder - cut a metal profile for the frame, if the choice fell on him. The angle grinder can also cut plastic siding panels even at low temperatures;
- Lace for accurate exposure of the siding battens;
- Building level or plumb;
- Screwdriver or adjustable drill;
- Pencil and square;
- Yardstick.
In addition to all of the above, scaffolding should be prepared, they can be rented. In order to save money, you can put together your own from long boards. Of course, in order for the entire power tool to work, it is necessary to cook in advance or make an extension cord yourself. What your options and preferences are for you to decide.
-
What boards can not be used for half-timbered
-
Why does the grinder work, but the disk does not spin
-
Features of the installation of half-timbered columns
-
How to make a rectangular cutout in ceramic tiles
-
How to restore knife marks on a countertop
-
What mistakes are made when the radiator is connected diagonally?
-
When an adjustable floor is more profitable than a capital screed
-
What primers are not suitable for application under fiberboard
-
What installation errors lead to the leakage of the polycarbonate canopy
-
When you need to install heating radiators not under the window
-
How to paint from spray can without smudges
-
How to cut glued tiles on a wall
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
