How to cut tiles without dust

Ceramic tiles are often used as a material for facing internal and external surfaces. It is not afraid of moisture, the effects of aggressive cleaning agents, practically does not lend itself to mechanical damage and does not need special care. Most often it is used in the process of lining the bathroom and the working corner in the kitchen.

/

In some cases, it is required to independently cut ceramic tiles into fragments of the required size and shape. Equipment such as a tile cutter or grinder comes to the rescue.

However, almost always these works are accompanied by the occurrence of a large amount of dust. If this is not critical in the process of large-scale repairs, then what should I do if the tiles need to be cut in a clean room?

Dust-free tile cutting at home

The likelihood of a large amount of debris during work is increased using such a powerful electric tool as a grinder. A little trick will allow you to cut ceramic material and not stain the room in which work will be carried out. For this, it is necessary to periodically moisten a piece of material, according to which cutting will be carried out by a grinder.

instagram viewer

/

It is possible to fill the seam formed after the passage of an electric tool yourself or using a special device. The device for automatic fluid supply is mounted on the protective cover of the cutting tool.

Using a plastic canister

The second simple method of getting rid of dust when working with a grinder is to prepare a large plastic canister. This capacity can be saved after using the primer.

The canister needs to be turned on its side and cut off one of its edges with a sharp ceramic knife. Thanks to this simple action, you can get a sealed plastic box with an open top.

After the manipulations, the ceramic tile must be laid on the walls of the canister strictly above the resulting hole. When cutting, almost all dust will settle on its bottom.

/

A big advantage of the methods considered is their cost-effectiveness and affordability. After all, canisters almost always remain after repairs in a house or apartment, and a special device for supplying water can be purchased at affordable prices. To apply methods of cutting tiles without dust, you do not need to be a professional builder. The main thing is to be careful and not rush.

  • When an adjustable floor is more profitable than a capital screedWhen an adjustable floor is more profitable than a capital screed
  • What mistakes are made when the radiator is connected diagonally?What mistakes are made when the radiator is connected diagonally?
  • What are the consequences of building a site without permission?What are the consequences of building a site without permission?
  • What errors lead to water hammer in the heating system and how to avoid themWhat errors lead to water hammer in the heating system and how to avoid them
  • What to do if smoke from the stove goes to the houseWhat to do if smoke from the stove goes to the house
  • What could cause the cabinet door to bendWhat could cause the cabinet door to bend
  • 5 reasons to change the wizard without waiting for the repair to finish5 reasons to change the wizard without waiting for the repair to finish
  • Why you can not allow for flaws in the installation of roof nodes from corrugated boardWhy you can not allow for flaws in the installation of roof nodes from corrugated board
  • How to cut a fiberboard with a flat edge with a regular grinderHow to cut a fiberboard with a flat edge with a regular grinder
  • What boards can not be used for half-timberedWhat boards can not be used for half-timbered
  • Why you should not put aluminum radiators on central heatingWhy you should not put aluminum radiators on central heating
  • Which rack ceiling is the bestWhich rack ceiling is the best

New publications are published daily on our channel in Yandex. Zen

Go to Yandex. Zen/
Pros and cons of a modern wooden facade

Pros and cons of a modern wooden facadeHelpful Hints

1 But there are also negative application factors, since natural raw materials are highly susceptible to external factors. The minuses include the following basic qualities o...

Read More
Is it worth it to paint the OSB slab, or does it peel off very quickly

Is it worth it to paint the OSB slab, or does it peel off very quicklyHelpful Hints

OSB (OSB) is an oriented - particle board, which is a widespread material to the extent of its affordable price and excellent adaptability for the installation of simple buildings. For the long-te...

Read More
Properties and features of metal doors

Properties and features of metal doorsHelpful Hints

When arranging a home, special attention should be paid to the selection of high-quality and proven doors. For the manufacture of various materials can be used. The two most popular are wood and ...

Read More