The carpet can safely be called a universal floor covering. High-quality material allows you to increase thermal and sound insulation in a house or other room, to make the interior more comfortable.

Carpet can be divided into two types - household and commercial. The first species is distinguished by a high and dense pile. The second type has a not so high pile and is often used for lining in the corridors and lobbies of hotels, offices and other public buildings.
Very often, people are interested in the issue of laying carpet on the laminate. Indeed, in many cases, the desire to pre-dismantle the old flooring does not arise. Immediately it is worth saying that this method of laying can be called one of the simplest and most economical. All because for fixing the carpet you do not need to use glue or other materials.

How to lay a carpet on a laminate?
The first step is to thoroughly clean the surface of the laminate. After that, you need to spread the carpet on the surface, be sure to leave 5-10 cm of material as allowances for the walls. After the roll is rolled over the surface of the floor, it is necessary to give it some time so that it takes shape and straightens out. You can leave it for the night, and in the morning proceed to the next stage of work.
After the carpet is straightened, you need to roll it on the floor surface using a roller or other improvised tool. During the rolling process, it is important to make sure that there are no air bubbles and irregularities. In the area of corners, the carpet must be cut using a sharp clerical knife.

At the final stage, it is necessary to trim the excess material that remained as allowances. After trimming them, you can begin to install skirting boards.

As can be seen from the above, the installation is simple, and therefore everyone can do it on their own. However, it is necessary to take into account some nuances that can affect the durability and aesthetics of the coating.
What to pay attention to?
As you know, a laminate is a rather durable coating, but it is afraid of moisture, which can cause it to delaminate or rot. To protect the laminate from moisture, which may result from accidental spills of liquid on the carpet, an additional layer of waterproofing should be placed between the coatings.
-
Is it profitable to turn off the power supply and switch to your
-
What ventilation should actually be in accordance with GOST
-
Is it true that water savers save water
-
Mirror tiles in the interior
-
In what cases do you need notches on the wall before plastering
-
How to make a huge LED
-
Border ribbon for wallpaper
-
What you need to know about the redevelopment and device wardrobe room
-
When an adjustable floor is more profitable than a capital screed
-
What are the consequences of building a site without permission?
-
What mistakes are made when the radiator is connected diagonally?
-
What errors lead to water hammer in the heating system and how to avoid them
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen