Where in the house mold can live

The occurrence of mold in a house or apartment does not bring about anything good. Her appearance can be harmful to health and redecoration. What causes mold and where can it live?

Kitchen

Mold can occur in the kitchen from constant condensation during cooking, especially on the walls and ceiling. This can be avoided by using covers on pots and pans. Also, a significant part of the moisture is drawn by ventilation or exhaust, which provides air exchange per hour for up to 15 cycles.

Bathroom

The bathroom is the place in the apartment where the percentage of humidity is highest. Therefore, the formation of mold here is most likely. To avoid an unpleasant neighborhood, it is necessary to take care of buying an exhaust fan when moving.

The fan should be located opposite the front door directly under the ceiling. The necessary air exchange must be at least 15 cycles of the total volume of the room. The fan must first of all meet this requirement, since at lower rates, the humidity in the bathroom will be high. To reduce humidity, a warm floor is also installed.

To produce less moisture, you should know that first cold water is turned on, and then hot water. The door in the bathroom with the fan installed must always be closed.

Cladding material

If non-waterproof materials are used as the material for the cladding in rooms with high humidity, then mold or fungus may form under the tiles or other decor. This is especially dangerous because the process occurs in a latent form, and does not immediately become apparent.

To prevent moldiness of the material under the lining, it is necessary to use moisture-resistant boards of gypsum board, which are treated with special antiseptic solutions.

Ventilation grills and shafts

On the surface of the grille and ventilation shaft daily accumulates debris and dirt, as well as moisture. The latter can provoke the development of mold. To prevent this, it is necessary to clean the ventilation elements mechanically at least twice a year.

Drying room

Typically, a clothes dryer is located in one of the rooms, ideally in the one where there is good ventilation and heating. In reality, it is put where you have to. What comes of this? For example, with constant drying of laundry in a room, humidity increases and mold may appear.