When choosing an air conditioner for your home, it is important to consider not only its model, power, but also the right place to install. It is important to consider that the most cooled will be air at a distance of two meters from the device, therefore it is allowed to have a sleeping or workplace in this area where you spend most of your time.
When choosing a place for installation, it is necessary to take into account that the air conditioner is not located near the heating appliances, in the places of the air flow should not stand furniture that will act for him an obstacle.
Most often, when installing the air conditioner, the location of the windows is taken into account, if the room is on the sunny side, the air flow from the air conditioner must be perpendicular to the flow of air from the window, otherwise the reduced temperature will be distributed completely unevenly.
When the air conditioner is placed under the ceiling, the distance to it should be at least 15 cm, it can provide the necessary space for the movement of air masses.
When the split system is installed in the bedroom, then an ideal place for it is the location above the head of the bed. In this case, the cooled air will flow outside the bed and will be well distributed throughout the room.
When positioning the air conditioner in the kitchen, besides the fact that it should be away from heating appliances, it is important take into account that air does not get into neighboring rooms, otherwise, along with air flows, it will get into other rooms and smell. It is not allowed to place the air conditioner in front of the gas stove, the air flow can extinguish the fire. Given all this, as well as the relatively small size of kitchens in most apartment buildings, a corner installation can be considered the best option.
Installation of the air conditioner should be done by specialists. Of course, you can save a little and try to do everything yourself, but this savings is extremely controversial, because in case of improper and poor installation, the device will not work properly. Moreover, special tools and professional equipment are needed to install and verify the device’s performance.
Most often, the length of the freon path between the indoor and outdoor units is about 5-10 meters, this is the most optimal. But in some cases, a longer route may be required, this will affect the cost of installation.
-
How to make sewers in a country house: an easy and budget way
-
How to choose a metal entrance door to the apartment?
-
Is it profitable to turn off the power supply and switch to your
-
New bill: how much do you have to pay for electricity
-
How to hide electric wires in an apartment
-
What can happen if you fill the warm floor with a leveling agent
-
Original bench made of wood
-
Choosing a carpet: 5 useful tips
-
Quality control of repair, basic nuances
-
Rating of the worst cleaning products
-
How to clean a bathroom in 15 minutes
-
Aquarium: tips for choosing, their types and forms
New publications are published daily on our channel in Yandex. Zen
Go to Yandex. Zen
