What plumbing can break through, what should be avoided

The selection and installation of plumbing fixtures should be taken extremely seriously. Indeed, in an alternative embodiment, sewer pipes and water pipes can easily break through. Thus, a lot of cleaning hassle will be added. But the most important thing is that as a result, repairs in the apartment can be ruined. And if it is expensive, then the owners certainly will not be happy about this.

In order to prevent such unpleasant situations, it is recommended to choose plumbing from well-known manufacturers. If you give preference to such products, you will be able to reduce the risk of breakthroughs of the plumbing and sewer system in the house.

When choosing plumbing, it is better to focus on the duration of the store. Thus, there is a much greater chance of acquiring high-quality devices.

Trust the installation of plumbing in the house is necessary only for real professionals, not self-taught. There are special companies where you can order the services of such workers. After completing work, the owner will receive a guarantee. In case of problems, it is possible to contact them.

What is a water hammer?

A water pipe break can occur due to water hammer. Such a nuisance occurs due to a sharp or emergency shutdown of the pump. Also, the cause of this problem may be the quick closing of the mixer, electricity drops, as well as the shutdown of the protective system of the pipeline. It is possible to understand that the water supply system is overloaded by the noise that appears at the moment of opening and closing the tap.

How to avoid water hammer:

• The crane must be opened and closed smoothly, without sudden movements;
• It is recommended to use pipes with a large diameter when laying the water supply. This will reduce the speed of the supplied water;
• It is advisable to install a gearbox and shock absorber.

Why can break through the sewer?

The sewerage system can break through if a defect appears in the pipe. This usually occurs due to corrosion on the pipe. In addition, if you choose cheap low-quality pipes or lay them incorrectly, it can also lead to a breakthrough. Due to the wear of the gaskets on the pipes, the sewer can also break through.

How to avoid this:

• It is necessary to find good specialists for laying the sewer system;
• Periodically it is necessary to check the condition of the plumbing. If there are foci of rust, it is worth thinking about replacing pipes in the near future.