How to get rid of white plaque on the tiles in the bathroom

Tile in the bathroom needs regular care, because without it, the tile is covered with white coating and loses its original color and luster. How to get rid of white smudges and what forms them?

How to clean a tile

To clean the tiles in the bathroom from plaque, you need to take a warm soapy solution, a weak concentration of vinegar or ammonia. Rubber gloves are put on hands. It is best to wash the tiles with a soft sponge or an old toothbrush, or a microfiber cloth.

The process is phased as follows:

• First, the tile is washed off with a warm soapy solution with a microfiber cloth, movements begin from below;
• A sponge soaked in vinegar or ammonia, wipes a soap solution;
• Then tiles are wiped dry, movements begin from above.

It is enough to take half an hour a week to process the tiles so that it does not lose its appearance and luster.

Calcium purification

Typically, such plaque is formed if the water contains a lot of salts of magnesium and calcium. Because of them, the surface of the tile dims and ceases to shine, being covered with a thick opaque crust. To clean the bathroom, it is not necessary to buy expensive products from stores, because all the ingredients for a home remedy are always at hand.

Procedure:

• Table 6% vinegar is poured into a spray bottle and sprayed onto tiles and stitches;
• For a good effect, vinegar is left on the tile for 5 minutes;
• Softened deposits are removed with a brush or elastic sponge;
• Next, the tile is washed with tap water;
• The wall is wiped dry with microfiber.

Soap Scavenging

Soap deposits are formed on tiles in the form of a thin matte film from a mixture of gels, shampoos and other hygiene products. If you regularly clean the tile from a layer of soap, then this is much easier. Aged plaque is more difficult to remove.

How can I remove soap deposits:

• Detergent - excellent liquid soap dispenser dishwashing liquid. To do this, a few drops of the product are dissolved in warm water and applied to the tile with a sponge. Wait about half an hour, and then rinse with clean water from the tap;
• Home remedies - a mixture of vinegar, soda and ammonia copes well with plaque. For a half liter of water, seven tablespoons of baking soda are taken, four tablespoons of vinegar and five tablespoons of ammonia are added. Everything mixes well until the crystals of soda are completely dissolved. The solution is poured into a spray bottle and sprayed onto the tile. After half an hour waiting, the tile is washed with a sponge with clean water.