Get rid of the fungus on the walls: useful tips

The article offers several solutions to the problem of removing fungus, condensate from the walls and eliminating high humidity in the premises of your home. The dampness in the premises of your house for a certain period of time and under certain conditions can be deposited on the walls, ceiling and other places in the form of fungus and condensate. In rooms, in the kitchen, in the hall, and even more so in the bathroom with a toilet, it can appear in the case of high humidity in the room and other factors.

The resulting wet spot, condensation and even fungus (if dampness and humidity are at a high level for a long period of time) on the walls, of course, an unpleasant situation. She is able to get out of patience and facilitate a call to special services for cleaning, disinfection and elimination of situations such as yours, but do not do this in such a hurry.

To get started, read this article and try some of the tips below. If you find wet spots on the walls in the summer, try opening the windows in the room and airing it, of course will only help if the sun is shining brightly on the street and the air temperature is high, that is, if there is enough hot.

A number of simple and uncomplicated, and which is very good, quite effective ways will help you remove all the condensate formed from the room.

Install humidity detectors and special exhaust fans in the wettest rooms, most often the need to install them appears only in the kitchen and in the bathroom. Installation of a desiccant will contribute to faster removal of moisture from rooms.

Poor sealing of windows, doorways and old chimneys contributes to the formation of condensate. PTherefore, high-quality sealing and quick elimination of this problem will reduce the likelihood of condensation, and this in turn will reject the possibility of moisture accumulation in all unforeseen wall sections in your home.

The simplest and most commonplace way to reduce air humidity is to close the lids. pots and dummies when they are on fire and the liquid in them evaporates into the surrounding Wednesday In extreme cases, to eliminate fungus and very wet sections of the walls, you can resort to applying water-absorbing paint or to replacing a layer of plaster in the problem area. Before applying a new layer of plaster, you need to remove the old one, wait a while, during which the wall will dry out, several days should be enough.

After that, you can apply the plaster on the wall - ordinary or special. Processing the walls with waterproof plaster will allow you to process the walls and ultimately get almost the same properties as waterproof paint. If the room is very humid, the plaster will absorb all the moisture into itself; if the situation is the opposite, give it away.

Small air bubbles on the surface of the material isolate the plaster from condensation and the formation of more moisture in it. Plain and water-based paints often peel off in a humid environment, so the use of special paints against moisture protects the walls from condensation and the formation of fungus. Anti-condensation paint in a humid environment will absorb all excess steam and moisture, and in a dry environment it will give it away.

You can also adjust some parameters of heating and ventilation, for a short period to get rid of high humidity. Good ventilation in the room in a complex with constant heating will allow you to dry the air and quickly save you from this annoying problem. Correct calculations in the parameters of ventilation and heating will allow in the economic plan to carry out work to get rid of condensate for an acceptable amount.

What is the final decision to eliminate condensate, high humidity and fungus you make, will solve this problem in different fees and in economic terms can vary significantly from another chosen option to eliminate this ailment.