How a plastic skirting board can ruin an entire design

Content

  • 1 Why plastic skirting boards are a bad option
  • 2 How to choose the perfect baseboard
    • 2.1 Tip 1
    • 2.2 Tip 2
    • 2.3 Tip 3
    • 2.4 Tip 4
    • 2.5 Tip 5
  • 3 Alternative to plastic skirting boards

No matter how beautiful the wallpaper, ceilings and other details in the room are, the whole interior can be killed by incorrectly selected skirting boards. But you can also save it with a good and suitable baseboard.

/

Why plastic skirting boards are a bad option

Now on the construction market there are many options for a variety of plastic skirting boards, but all have one thing in common - they do not look aesthetically pleasing. Consumables, plugs, corners and fixtures, for such skirting boards are different from the base material, they look cheap and ugly.

/

It is customary to select plastic skirting boards to match the color of the floor, but usually it is a continuation of the wall, so the material should first of all correspond to it. Skirting boards are made of polyurethane, MDF, gypsum or wood.

instagram viewer

How to choose the perfect baseboard

In order for the baseboard to fit perfectly into the interior and not spoil it, it is necessary to select material according to several parameters.

/

Tip 1

It is necessary to combine the baseboard with the color of the doors in the room. If the canvas is white, then the baseboard is white. And this is regardless of the shade of the floor.

/

Tip 2

If the house has low ceilings, then the best solution is to paint the baseboard in the color of the wall. Contrast color always steals centimeters against the wall, and the plain color looks like its continuation. It is also recommended to paint the ceiling cornice in the color of the walls.

/

Tip 3

Tall skirtings of about 10 cm look elegant and interesting. You can increase them in width with the help of moldings of the same color. It is worth remembering that embossed structures are washed more difficult, so the method is not suitable for everyone.

/

Tip 4

In order for the baseboard to look good in the overall interior, you need to choose high-quality materials. It is better to choose skirting boards from professional brands that have high strength and wear resistance. Well-established firms are Orac and Europlast.

/

Tip 5

Skirting boards must match the width of the cashing. If they are narrower or wider, then the appearance is very bad, it looks messy. Sometimes a wide baseboard can be adjusted by sawing off the edges at 45 degrees.

/

Alternative to plastic skirting boards

By far, the most common material is wood. There are different skirting boards - from budget options to premium. Wood provides environmental friendliness, durability and beauty.

/

Veneered skirting is a more affordable alternative to wood, but no less beautiful and practical. These skirting boards are selected for any interior, have a wide range of different colors and sizes. The basis of the product is inexpensive wood, and the finish is valuable arrays of oak, ash or beech.

  • When an adjustable floor is more profitable than a capital screedWhen an adjustable floor is more profitable than a capital screed
  • What mistakes are made when the radiator is connected diagonally?What mistakes are made when the radiator is connected diagonally?
  • What are the consequences of building a site without permission?What are the consequences of building a site without permission?
  • What errors lead to water hammer in the heating system and how to avoid themWhat errors lead to water hammer in the heating system and how to avoid them
  • Why does the grinder work, but the disk does not spinWhy does the grinder work, but the disk does not spin
  • What could cause the cabinet door to bendWhat could cause the cabinet door to bend
  • 5 reasons to change the wizard without waiting for the repair to finish5 reasons to change the wizard without waiting for the repair to finish
  • How to cut tiles without dustHow to cut tiles without dust
  • How to cut a fiberboard with a flat edge with a regular grinderHow to cut a fiberboard with a flat edge with a regular grinder
  • Why you should not put aluminum radiators on central heatingWhy you should not put aluminum radiators on central heating
  • Why you can not allow for flaws in the installation of roof nodes from corrugated boardWhy you can not allow for flaws in the installation of roof nodes from corrugated board
  • What boards can not be used for half-timberedWhat boards can not be used for half-timbered

New publications are published daily on our channel in Yandex. Zen

Go to Yandex. Zen/
What to do if the tile began to fall off

What to do if the tile began to fall offHelpful Hints

If you notice that in some places the layer of tile began to move away from the surface - you can’t hesitate, otherwise you will soon have to replace it entirely. First you need to establish the r...

Read More
What to do if neighbors flooded from above

What to do if neighbors flooded from aboveHelpful Hints

Very often, in apartment buildings, residents face the problem of flooding, living neighbors drown lower than living ones. In such a difficult situation, people do not always understand exactly wh...

Read More
Bike storage: basic tips

Bike storage: basic tipsHelpful Hints

Cycling enthusiasts often have difficulty storing their equipment. It is most convenient to hang bicycles on the wall, because there they do not bother anyone and do not take up too much space. Th...

Read More