How to solve the problems of a jumping washing machine

The washing machine sometimes creates very strong vibrations during the spin cycle, at which time it starts to jump. Some people think that the problem is in the legs with which the case has come off, but this is not always the case. Sometimes the reason is more serious and lies in the breakdown, in order to prevent the final breakdown, it is necessary to deal with this phenomenon.

The reasons why the machine jumps

There can be many reasons for a jumping machine; some of them are solved independently. And some require serious diagnosis:

• The machine is unstably placed on the supports. For example, one side is off the leg;
• Due to the uneven distribution of linen on the drum of the machine during the spin cycle;
• Some people forget to remove the transport bolts from the machine before installation;
• Vibrations can be caused by small foreign objects that fall into the gap between the drum and the tank. It can be pins, coins, buttons;
instagram viewer
• When springs and shock absorbers fail in the mechanism, the machine begins to vibrate;
• Bearings break;
• Damage to the electric motor;
• Destruction of the counterweight or loosening of the fixtures.

Fault detection

To begin with, it is necessary to exclude the simplest reasons, for example, imbalance of the drum. It is determined by the following features: when spinning things get stuck in a lump (for example, small things clogged in a duvet cover), the weight of the laundry does not correspond to the selected mode, the drum is overloaded more than on 2 \ 3.

Next, you need to check for the transport bolts that are on the back of the machine. There are always four of them, they form a square in the center.

It is also easy to calculate the incorrect installation of the washing machine. It is necessary to put pressure on it in the idle state, if it is swinging, it means that one of the sides has left the leg.

To detect foreign objects between the tank and the drum, it is necessary to illuminate this space with a flashlight, scrolling the tank.

Next, check the machine for more serious malfunctions. Damage to springs and shock absorbers is accompanied by a drum knock during washing, bearing wear - rattle, weakening of the counterweight - knock.

If all these reasons are not suitable, then the last two remain - a motor breakdown or a factory defect.

How to fix the malfunction yourself

Elimination of the imbalance is carried out by simple control of the amount of linen and the compliance of the mode with the loaded weight.

If the machine is not installed correctly, it is necessary to put all sides on the legs in a stable position, also check the flatness of the floor and, if necessary, lay something solid. You can also use anti-vibration stands.

It is better to entrust the elimination of the remaining reasons to a specialist, because all of them require analysis of the washing machine and serious manipulations.