How to make grounding in the apartment

Electricity is certainly one of the most important discoveries of mankind, but sometimes it can cause harm. Without grounding, it is not possible to use electrical appliances safely. Thanks to grounding, household appliances will remain operational for a long time, and this also protects a person from damage by a current discharge. In old apartment buildings, the grounding is initially simply absent, but outdated energy-saving systems replace new and improved ones.

If the apartment needs to be grounded, it is best to turn to professional electricians for help, especially if you are far from this issue. But in some cases, everything can be done completely independently, the main thing is to follow safety precautions and figure out which electrical system you have.

Why do it in an apartment

Grounding itself means connecting a network point to a grounding device, as a result, the voltage becomes safe for humans. In other words, this means providing protection in the event of a large potential accumulation or a sharp voltage surge, grounding will allow dangerous current to be removed to the ground.

In the event that the builder simply did not provide grounding, then you can connect a device for protective shutdown. In the event of a current leak, such a device will immediately turn off the power of the household appliance, whether it is a washing machine, sockets or a water heater.

Ideally, you can replace the wiring in the apartment, instead of using a two-wire, a three-wire. Most likely, sooner or later, utility services will make grounding in your house, you In this case, it will be completely ready for this, it remains only to connect the wire to the shield bus on floor.

Installation of a personal circuit

Often, residents of apartments of old buildings are independently engaged in grounding, in which case an individual circuit will be required. To the basement of the apartment you need to extend the PE wire along the riser. Near the house, electrodes should be driven in, interconnected by a metal platinum, or just three metal corners. To such a device, a wire is supplied from the floor, and its second end is fixed in the shield. It remains only to connect the wire from its electrical network in the apartment with the wire in the shield on the floor, and everything is done.

Before you start installing the grounding yourself, you should inform your management company, otherwise in case of an accident you may be found guilty.